GSR throttle body, wideband o2, Xtreme hulog, CRX floor mats
12-01-2007, 10:46 PM
#1
Honda-Tech Member
Thread Starter
GSR throttle body, wideband o2, Xtreme hulog, CRX floor mats
Ok... want to get rid of some stuff to find my little B series project...
GSR throttle body, not bored or anything. I'm including the longer GSR throttle cable you need to use this, or you can take it apart and flip the thing around to work with a normal cable. This will bolt up to all B and H series manifolds, as well as 92+ D series manifolds. FITV is blocked off, and TPS included. I can swap a good FITV on to this as well since I don't use the one on my current throttle body anyway.
Innovate LC-1, used in my car for about a year. Works great, needs a new sensor (Bosch sensor readily available as a VW replacement part). Switch and LED already wired into the controller's harness.
B16 piston return springs, dual (inner-outer) type. I removed these from my B16 since I'm not running high enough compression or boost that require a dual spring. Good for ~200-300hp and 10k RPM. I believe these will fit ITR (B18C/C5) as well.
Moates Xtreme Hulog. Just like the normal Hulog, but it's in a case and retains the same COM port all the time.
Blue CRX floor mats, in not-great-but-not-bad shape. I would keep them but really I'm gonna ruin them because I use floormats (I don't keep them in the closet or something). I'm just going to get aftermarket mats I don't feel bad about beating on, so these are up for someone who needs/wants a set of OEMs. They definitely could use a good cleaning!
GSR throttle body, not bored or anything. I'm including the longer GSR throttle cable you need to use this, or you can take it apart and flip the thing around to work with a normal cable. This will bolt up to all B and H series manifolds, as well as 92+ D series manifolds. FITV is blocked off, and TPS included. I can swap a good FITV on to this as well since I don't use the one on my current throttle body anyway.
Innovate LC-1, used in my car for about a year. Works great, needs a new sensor (Bosch sensor readily available as a VW replacement part). Switch and LED already wired into the controller's harness.
B16 piston return springs, dual (inner-outer) type. I removed these from my B16 since I'm not running high enough compression or boost that require a dual spring. Good for ~200-300hp and 10k RPM. I believe these will fit ITR (B18C/C5) as well.
Moates Xtreme Hulog. Just like the normal Hulog, but it's in a case and retains the same COM port all the time.
Blue CRX floor mats, in not-great-but-not-bad shape. I would keep them but really I'm gonna ruin them because I use floormats (I don't keep them in the closet or something). I'm just going to get aftermarket mats I don't feel bad about beating on, so these are up for someone who needs/wants a set of OEMs. They definitely could use a good cleaning!
12-03-2007, 05:17 PM
#5
Honda-Tech Member
Join Date: May 2006
Location: The Bay, CA, usa
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Re: GSR throttle body, wideband o2, Xtreme hulog, CRX floor mats (downest)
there isnt a gauge for the wideband? do you just use the software and read it off your laptop?
12-03-2007, 05:25 PM
#6
Honda-Tech Member
Thread Starter
Re: GSR throttle body, wideband o2, Xtreme hulog, CRX floor mats (TuwboBuddy)
It's just the controller, it has 2 analog outs, you can run one to the ECU and one to a gauge. I'm including the software for it as well (which is free from Innovate anyway) and the serial cable needed to link to the controller, just forgot to picture it.
Trending Topics
01-02-2008, 03:28 PM
#16
Re: GSR throttle body, wideband o2, Xtreme hulog, CRX floor mats (downest)
hey man i'm not sure if you went on vacation or what's up?
can you tell me what's going on with the Hulog?
Thanks man
can you tell me what's going on with the Hulog?
Thanks man
01-16-2008, 12:58 PM
#18
Re: GSR throttle body, wideband o2, Xtreme hulog, CRX floor mats (downest)
still havn't recieved the hulog, coudl you tell me when you shipped it?
i hope it's not lost in the mail
i hope it's not lost in the mail
01-17-2008, 03:54 PM
#19
Re: GSR throttle body, wideband o2, Xtreme hulog, CRX floor mats (98Luder)
Dude, could you please let me know when you or your room mate sent it out?
I sent you payment on Dec13th for that Hulog wire and it's over a month now.
Well....take off a week for Xmas and new years. Gettin a bit worried here man.
Please let me know
I sent you payment on Dec13th for that Hulog wire and it's over a month now.
Well....take off a week for Xmas and new years. Gettin a bit worried here man.
Please let me know
01-21-2008, 09:19 PM
#20
Re: GSR throttle body, wideband o2, Xtreme hulog, CRX floor mats (98Luder)
dude i need to know what's going on or i'll have the make a claim with paypal i didn't recieve the parts i paid for. Please get back to me, i need to know the date you actually shipped this stuff out on
02-14-2008, 08:34 PM
#21
Re: GSR throttle body, wideband o2, Xtreme hulog, CRX floor mats (downest)
sorry it didn't work out
but thank you for resolving this issue.
Modified by 98Luder at 10:04 AM 2/20/2008
but thank you for resolving this issue.
Modified by 98Luder at 10:04 AM 2/20/2008
Thread
Thread Starter
Forum
Replies
Last Post