lke2drvgsr

FS: (all pics available upon request) - all parts are off a '94 2 door GSR

buy pays shipping (and 3% paypal if it's used) for all items.

<u>located in north chicago</u>
<u>located in north chicago</u>
<u>located in north chicago</u>
<u>located in north chicago</u>

motor:
- b18c1: 84mm benson sleeved bare block. used for 50 miles. (see below for more information and pics) $950
- 9:1 84mm JE pistons on eagle forged rods, also used for 50 miles. $550
- Spec stage 3 clutch with 8 lb aluminum flywheel. used for 50 miles. $550obo
- skunk2 intake manifold, comes with gsr fuel rail. good condition. $150 - pending sale
- GSR throttle body. $70obo
- OEM GSR crank pulley with bolt. $30
- ProStreet timing belt kit. comes with timing belt, water pump, tensioner and spring. used for 50 miles. $125
- GSR oil pan, dented on the bottom, but works fine. $50

suspension:
- tein HA suspension on a dc2, comes with ITR rear LCA's (you need them to put it on a dc2 that's not a type R) they have rust on them, one of them makes a clunking noise, but they ALL STILL WORK GREAT! pics available upon request. asking $450 - teins are still installed on car, and i won't be able to take them off until march 20th-28th or so (my spring break when i come back from school). i can get pics of them this weekend, but they'll still be installed on the car.
-skunk2 front upper adjustable control arms. beautiful condition. $140
- bronze 15" 4x100 rota c10's with bronze polished lip. wrapped in 80% or so falken azenis, beautiful condition. asking $550, or $650 with an extra set of nokian WR winter tires.

interior:
- black leather GSR seats (front and back), great condition (but back seats may not have the necessary clips, although they still fit in snug and still do hold in place) asking $350obo
*i am willing to part the front and rear seats. send me a REASONABLE offer..

misc.:
- apex'i WS catback exhaust. great condition, sounds awesome (real quiet) $250
- OEM GSR cat. converter. 130k miles, but still passes emissions (recently, too) $50 OBO
- DC ceramic header, some scrapes/usual wear. about 50k miles on it. $100 - pending sale
- GSR hub assemblies. comes with brembo blanks and hawk HPS pads that were only used for ~ 1k miles. $300 for all 4 corners

make reasonable offers if you don't like a price, but don't lowball or flake MANY more pics available, just PM me or IM me at Lke2drvgsr on AIM if interested.

and DO NOT STEAL MY PICS AND POST THEM UP ON ANOTHER SITE. IM USING ISERVE, SO IT EATS MY BANDWIDTH IF POSTED UP ANYWHERE ELSE BUT HT. thank you.

-located in north chicago.


















and the damage on the block... this can be fixed by plugging it up with the golden eagle bolts (brand new in package, they come with the block free of charge) that FILL IN the squirters. the squirters could/shoudl be removed on blocks with forged internals to increase pressure elsewhere in the motor, and because forged internals do not need the extra oil squirted directly at them.




Modified by lke2drvgsr at 10:11 PM 3/9/2005


Modified by lke2drvgsr at 12:32 AM 3/10/2005


Modified by lke2drvgsr at 4:21 PM 3/10/2005


Modified by lke2drvgsr at 1:53 PM 3/11/2005


Modified by lke2drvgsr at 1:54 PM 3/11/2005


Modified by lke2drvgsr at 5:49 PM 3/12/2005

natesgarage

I can vouch for this guy. I was there during the entire build and put every peice in it;s place. Everything you see I've personally taken care of. Anyone that buys anthing from him will be sponsored by Nates Garage for a very long, long time. This means dealer costs on whatever they want, plus they could be part of dealer group buys. Which is even lower than other group buys people can get. Just PM after you've bought something and I'll set you up. There you go man that **** should clear like smoke in the wind.

iH8RICERZ

iTrader: (1)

where you located?! awesome prices btw!

interested in the tein ha and the apexi ws exhaust....

check your pm

lke2drvgsr

thanks for the vouch nate. good guy

pms replied. original post edited; teins and assemblies are still installed on the car, and i won't have time to take them off until spring break (in 2 weeks). until then, i'll only hold them if i receive cash.

lke2drvgsr

bump

lke2drvgsr

pics of the rims for those that requested them.

(click on the image for a bigger pic)

lke2drvgsr

bump

lke2drvgsr

get em before they go up on ebay.

civic_jdm

i got 500 cash for the rims...and can come get them asap ii am from michigan...