FS: Lots of DA9 and DC2 GSR parts... LOW PRICES
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2006
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
FS: Lots of DA9 and DC2 GSR parts... LOW PRICES
Hey guys. I am doing a GSR swap in my DA and i have some parts from the GSR swap that I am not using and alot of parts from the DA that have to go as well. I just lost my job so i need money very badly. Needless to say, the prices are going to be whatever the hell you offer because they got to go. Heres the list... please let me know if you want pics and i will email them, as it is a bitch to post a million pics of individual tiny parts........
PICS AVAILABLE... JUST ASK
Note: All DA parts are from an OBD0 1990 and have 172K on them unless otherwise noted. All DC parts are JDM OBD1 1994 and have 35K on them (JDM motor and thats what the dealer told me)
DC2 parts:
-cut engine wiring harness. dizzy and vtec clips cut -I USED IT
-stock intake pipe
-stock GSR/B16 downpipe/b-pipe (w/e you call it) NEW ADDITION
-stock GSR exhaust manifold
-A/C compressor
-A/C compressor bracket -TRADED!
-power steering pump
-power steering bracket
-alternator, slight chip on pulley
-water pump
-timing belt
-Auto tranny flywheel bolts... if there is such a thing
-driver side mount (the one thats already on the engine with 2 bolts facing up)
DA9 parts:
-BARE LS head. not the best condition. detonation occured under nitrous load. complete if you want, or sold without cams. detailed pics available to survey the condition. -SOLD
-Complete Intake manifold -SOLD
-Distributor -SOLD
-5 speed PR4 ECU and metal cover plate
-LS block -TRADED
-trunk cargo cover. small amounts of exposed metal which rusted. condition is 5/10
-stock front and rear (all 4) springs and shocks
-B18A cams with gears
-stock downpipe -SOLD
-A/C compressor (never used A/C... unknown condition)
-A/C condensor
-A/C bracket
-any and everything A/C related from the engine bay. any line, any hose, i have it.
-stock black valve cover. good condition, hardly any chips at all
-original clutch and pressure plate (worn out disc, just posting it because)
-all rear seatbelt components. very good condition.
-rear interior panels from when i gutted it. some have cracks in them from when bolts got caught during removal -trashed
-plastic trunk cover -trashed
-stock 5 speed shift ****. slight crack in clear plastic on top
-stock B series flywheel
-stock exhaust manifold with 02 sensor (bolts broke from rust when it was being removed)
-power steering pump -PENDING
-power steering bracket
-power steering fluid reservoir
-stock intake pipe. small (3/8) hole tapped for nitrous line
-exhaust mani heat shield -SOLD
-brand new drive axles. bought them from egay for 150ish. never used.
-energy suspension motor mount inserts for 90-91 DA
Random:
-two engine stands. both look weird and im not sure what they will bolt up to. They do NOT bolt up to my B18C or B18A... so idk wtf they mate to.
-Honda/Acura Zex dry nitrous kit. It will come with an Autometer Ultralite 2 52mm gauge with all fittings and -4AN lines to operate it. All in good condition. Was run for only 30 minutes before it blew the LS motor due to running lean. Only 30 minutes of use. I bought many parts in addition to the base kit which cost me $450. Total price for me was over $600. Bottle was just stolen...
Kit minus bottle : $250 i can get a bottle for 80-100 more and include it if u want
Thats about it. Theres other **** in my garage but im forgetting it.
WILLING TO TRADE FOR:
Parts i need and am willing to trade for include...
-B16 cable tranny (open diff. or LSD)
-2.25 inch full exhaust for DA
-Skunk 2 or Blox GSR IM
-all alluminum radiator
-JDM one pieces headlights for DA
-92-93 front bumper
-driver side racing/bucket seat. black or red
-2 BFG drag radials that will fit 14 in steelies (or ones already on 4X100 wheels)
-and anything you think i might want for a DA chassis with GSR engine.
I do understand that most of these parts are fairly expensive and it will take an assload of my parts to make up the price difference. But they are just up here in case.
Some of these parts are dirty from 17 years of use. I will do my absolute best to clean them off and restore as much bling as i can. no guarantees though.
I am a legitimate and very honest seller. I will not rip you off.
Email is drlangev@uncc.edu in case you want to do business off H-T.
Thanks guys and have a blessed day.
-
Modified by DAmnquickDA at 11:04 AM 4/9/2008
Modified by DAmnquickDA at 11:05 AM 4/9/2008
PICS AVAILABLE... JUST ASK
Note: All DA parts are from an OBD0 1990 and have 172K on them unless otherwise noted. All DC parts are JDM OBD1 1994 and have 35K on them (JDM motor and thats what the dealer told me)
DC2 parts:
-cut engine wiring harness. dizzy and vtec clips cut -I USED IT
-stock intake pipe
-stock GSR/B16 downpipe/b-pipe (w/e you call it) NEW ADDITION
-stock GSR exhaust manifold
-A/C compressor
-A/C compressor bracket -TRADED!
-power steering pump
-power steering bracket
-alternator, slight chip on pulley
-water pump
-timing belt
-Auto tranny flywheel bolts... if there is such a thing
-driver side mount (the one thats already on the engine with 2 bolts facing up)
DA9 parts:
-BARE LS head. not the best condition. detonation occured under nitrous load. complete if you want, or sold without cams. detailed pics available to survey the condition. -SOLD
-Complete Intake manifold -SOLD
-Distributor -SOLD
-5 speed PR4 ECU and metal cover plate
-LS block -TRADED
-trunk cargo cover. small amounts of exposed metal which rusted. condition is 5/10
-stock front and rear (all 4) springs and shocks
-B18A cams with gears
-stock downpipe -SOLD
-A/C compressor (never used A/C... unknown condition)
-A/C condensor
-A/C bracket
-any and everything A/C related from the engine bay. any line, any hose, i have it.
-stock black valve cover. good condition, hardly any chips at all
-original clutch and pressure plate (worn out disc, just posting it because)
-all rear seatbelt components. very good condition.
-rear interior panels from when i gutted it. some have cracks in them from when bolts got caught during removal -trashed
-plastic trunk cover -trashed
-stock 5 speed shift ****. slight crack in clear plastic on top
-stock B series flywheel
-stock exhaust manifold with 02 sensor (bolts broke from rust when it was being removed)
-power steering pump -PENDING
-power steering bracket
-power steering fluid reservoir
-stock intake pipe. small (3/8) hole tapped for nitrous line
-exhaust mani heat shield -SOLD
-brand new drive axles. bought them from egay for 150ish. never used.
-energy suspension motor mount inserts for 90-91 DA
Random:
-two engine stands. both look weird and im not sure what they will bolt up to. They do NOT bolt up to my B18C or B18A... so idk wtf they mate to.
-Honda/Acura Zex dry nitrous kit. It will come with an Autometer Ultralite 2 52mm gauge with all fittings and -4AN lines to operate it. All in good condition. Was run for only 30 minutes before it blew the LS motor due to running lean. Only 30 minutes of use. I bought many parts in addition to the base kit which cost me $450. Total price for me was over $600. Bottle was just stolen...
Kit minus bottle : $250 i can get a bottle for 80-100 more and include it if u want
Thats about it. Theres other **** in my garage but im forgetting it.
WILLING TO TRADE FOR:
Parts i need and am willing to trade for include...
-B16 cable tranny (open diff. or LSD)
-2.25 inch full exhaust for DA
-Skunk 2 or Blox GSR IM
-all alluminum radiator
-JDM one pieces headlights for DA
-92-93 front bumper
-driver side racing/bucket seat. black or red
-2 BFG drag radials that will fit 14 in steelies (or ones already on 4X100 wheels)
-and anything you think i might want for a DA chassis with GSR engine.
I do understand that most of these parts are fairly expensive and it will take an assload of my parts to make up the price difference. But they are just up here in case.
Some of these parts are dirty from 17 years of use. I will do my absolute best to clean them off and restore as much bling as i can. no guarantees though.
I am a legitimate and very honest seller. I will not rip you off.
Email is drlangev@uncc.edu in case you want to do business off H-T.
Thanks guys and have a blessed day.
-
Modified by DAmnquickDA at 11:04 AM 4/9/2008
Modified by DAmnquickDA at 11:05 AM 4/9/2008