FS: 94 Teg Part Out
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2000
Location: WI, USA
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
FS: 94 Teg Part Out
Parted out a 94 Teg- was a GSR originally. The shell is gone and am keeping the engine, trans, some suspension parts. Forgot to update the date on the camera but pics are from Jan 1, 2017
The following are for sale and may also be some smaller parts I am forgetting. Parts are located near Madison, Wi and would prefer local pick up, especially for the larger parts. Shoot me offers on things
SOLD- Unknown Brand CF Hood
Body parts are all in primer from the previous owner
Rear Hatch without wiper but has the wiring installed- $40
Doors- have the passenger side inner panel but the drivers side is garbage...- $40 each
Fenders- the one side has a side marker installed. In decent shape for a driver.- $25 each
Front bumper support- $20
A pair of Del Sol seats- drivers side has a tear but pass side is decent. could use a good cleaning- $50 for the pair
Shifter Console trim part - SOLD
the park brake trim part - SOLD
A pillar cover with two gage pods- includes volt gage and AF gage- $35
SOLD- Stock headlights in great shape
Aftermarket tail lights- $50
SOLD- Aftermarket steering wheel
Rear carpet- $25
Rear floor mats- SOLD
Rear seats- SOLD
Spoon Sports B-pillar brace- $50
SOLD- Megan Racing header
SOLD- Apexi exhaust
SOLD- Shift linkage with short shifter
SOLD- Billet rear lower control arms- Godspeed brand
Adjustable upper front control arms- $30
Front swaybar- should be from a GSR- $10
SOLD- Koni coilover setup.
AEM cold air intake for an LS/RS/GS Teg- $70
Shoot me offers for the parts or e-mail at devin_45 at charter dot net
Thanks for looking
The following are for sale and may also be some smaller parts I am forgetting. Parts are located near Madison, Wi and would prefer local pick up, especially for the larger parts. Shoot me offers on things
SOLD- Unknown Brand CF Hood
Body parts are all in primer from the previous owner
Rear Hatch without wiper but has the wiring installed- $40
Doors- have the passenger side inner panel but the drivers side is garbage...- $40 each
Fenders- the one side has a side marker installed. In decent shape for a driver.- $25 each
Front bumper support- $20
A pair of Del Sol seats- drivers side has a tear but pass side is decent. could use a good cleaning- $50 for the pair
Shifter Console trim part - SOLD
the park brake trim part - SOLD
A pillar cover with two gage pods- includes volt gage and AF gage- $35
SOLD- Stock headlights in great shape
Aftermarket tail lights- $50
SOLD- Aftermarket steering wheel
Rear carpet- $25
Rear floor mats- SOLD
Rear seats- SOLD
Spoon Sports B-pillar brace- $50
SOLD- Megan Racing header
SOLD- Apexi exhaust
SOLD- Shift linkage with short shifter
SOLD- Billet rear lower control arms- Godspeed brand
Adjustable upper front control arms- $30
Front swaybar- should be from a GSR- $10
SOLD- Koni coilover setup.
AEM cold air intake for an LS/RS/GS Teg- $70
Shoot me offers for the parts or e-mail at devin_45 at charter dot net
Thanks for looking
Last edited by ITC Racer; 05-22-2017 at 06:19 AM. Reason: parts list updated
Trending Topics
#20
Honda-Tech Member
Thread Starter
Join Date: Nov 2000
Location: WI, USA
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
#22
Honda-Tech Member
Thread Starter
Join Date: Nov 2000
Location: WI, USA
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: 94 Teg Part Out
Prices updated... and have some additional parts
Fuel door with hinge- $15
Front turnsignal assemblies- $50 for the pair
Park brake handle- $10
Sparco 4 point harnesses- red- $25 ea or both for $40
Fuel door with hinge- $15
Front turnsignal assemblies- $50 for the pair
Park brake handle- $10
Sparco 4 point harnesses- red- $25 ea or both for $40
#24
Honda-Tech Member
Thread Starter
Join Date: Nov 2000
Location: WI, USA
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: 94 Teg Part Out
Hey Skinsies- The fronts are the same part number between the 3G Integra and 98 Civic. As I understand it, the rears are basically the same except you will need to install the 3G Integra lower shock bushing into your control arm or put some washers between your lower control arm bushing and the shock clevis.
Thread
Thread Starter
Forum
Replies
Last Post