b18c1 into ef swap ***complete
04-03-2008, 05:18 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: XRichmondX, VA, US
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
b18c1 into ef swap ***complete
located: richmond virginia
<FONT SIZE="6">b18c1 almost 27k on motor <FONT COLOR="Red">$3,150k firm</FONT></FONT>*****not interested in trades or parting out***** $$$ everything you need to swap a 2000 OBD2 b18c1 into your ef, pulling motor swap so i can part the car out.
compression tested at 240 240 210 240, my guarantee is that you can can drive the car and see how it runs :thup:
includes
- hasport motor mounts and shift link *bought brand new
- gsr alxes 12k miles
- n1 ctr crank pulley and belt *bought brand new
- upper and lower radiator hoses
- OBD1 gsr ecu
- rywire OBD0-OBD1 jumper
- rywire engine harness (stock si harness and gsr harness but into 1)
- da clutch cable *bought brand new
- gsr throttle cable
- dc sport header (12k miles, small scratch/dent in bottom)
- heater hoses
- exedy stage 1 clutch
- no name intake
more pics if requested
Modified by JDM*addiction at 6:02 PM 4/13/2008
Modified by JDM*addiction at 10:09 AM 4/20/2008
Modified by JDM*addiction at 10:09 AM 4/20/2008
<FONT SIZE="6">b18c1 almost 27k on motor <FONT COLOR="Red">$3,150k firm</FONT></FONT>*****not interested in trades or parting out***** $$$ everything you need to swap a 2000 OBD2 b18c1 into your ef, pulling motor swap so i can part the car out.
compression tested at 240 240 210 240, my guarantee is that you can can drive the car and see how it runs :thup:
includes
- hasport motor mounts and shift link *bought brand new
- gsr alxes 12k miles
- n1 ctr crank pulley and belt *bought brand new
- upper and lower radiator hoses
- OBD1 gsr ecu
- rywire OBD0-OBD1 jumper
- rywire engine harness (stock si harness and gsr harness but into 1)
- da clutch cable *bought brand new
- gsr throttle cable
- dc sport header (12k miles, small scratch/dent in bottom)
- heater hoses
- exedy stage 1 clutch
- no name intake
more pics if requested
Modified by JDM*addiction at 6:02 PM 4/13/2008
Modified by JDM*addiction at 10:09 AM 4/20/2008
Modified by JDM*addiction at 10:09 AM 4/20/2008
Trending Topics
04-13-2008, 02:37 PM
#12
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: XRichmondX, VA, US
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Re: b18c1 into ef swap ***complete (JDM*addiction)
1 week sale... motor is still in car so you can see and hear it run.. you can drive it but the clutch slips hard because i blew it while tracking. 
Thread
Thread Starter
Forum
Replies
Last Post
2 0 3
For Sale
13
05-08-2005 09:33 PM
