2-1/2" Stainless Steel Mandrel Bent Cat Back System
01-08-2002, 05:01 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2000
Location: Fredericksburg, VA, USA
Posts: 5,135
Likes: 0
Received 0 Likes
on
0 Posts
2-1/2" Stainless Steel Mandrel Bent Cat Back System
This is the 2-1/2" OD system that was used for the Honda-Tech Header Test. It is 100% tig welded 304 polished stainless steel and utilizes 6 mandrel bends, a 22" long Magnaflow resonator and a 4" x 9" Magnaflow muffler. It has a 2-1/2" tip. The system has about 40 dyno pulls on it and was used only 1 day.
It was built to be used with a 16-3/4" long cat and a JDM type header on a 3 door Integra. The inlet diameter of the B pipe is 2-1/2" to 2-9/16" so there will be no mismatch when connected a 2-1/2" Carsound cat.
Please email me at smsproducts@novacoxmail.com
It was built to be used with a 16-3/4" long cat and a JDM type header on a 3 door Integra. The inlet diameter of the B pipe is 2-1/2" to 2-9/16" so there will be no mismatch when connected a 2-1/2" Carsound cat.
Please email me at smsproducts@novacoxmail.com
Thread
Thread Starter
Forum
Replies
Last Post