01DC4

iTrader: (3)

FS: Wilwood 4 Piston Front Big Brake Kit for any 90-01 Acura Integra (may fit 92-00 Civic's with ABS size hubs too) -- All Parts are brand new, just test fitted, includes 12.19" 2 piece rotors, brake line kit, street BP-10 Pads and Race Polymatrix A Pads -- just looking to liquidate it quickly at $680 plus shipping

(note, most likely will not clear 15" wheels although Wilwood says it could, we tested it with Kosei K1's and ATS Complites and neither would clear so we recommend 16" and up size wheels to run with it)



Mint 00-01 ITR / CTR Cams, In great ready to drop in condition. $340.00 Shipped

zuptidi

SOLD

cbotha

Used Aluminum Ultra Shield Seat with Cover. Sides have been trimmed to easier access elbow clearance (cover was not)
17" Wide 20 deg angle (standard)
$70 OBO plus shipping
Located in Clarkston MI
248693878two cgbotha@yahoo.com

cbotha

Springs For Sale
$65 pair shipped in the US
(N-new U-used)

Hypercoil 18SN-150 5" D 11 Long 150 lb N
Hypercoil S-200 5" D 13 long 200 lb U
Hpyercoil 12BO400 2.5D 12 Long 400 lbs N
HyperCoil 10BO900 2.5 D 10 Long 900 lbs N
HyperCoil 10BO550 2.5 D 10 Long 550 lbs U
Eibach 2.5 D 10 Long 550 lbs U
Carrera 2.5 D 8 Long 550 lbs U
Eibach 2.5 D 8 Long 700 lbs U
Eibach 2.5 D 7 long 500 lbs U
Eibach 2.5 D 6" long 750 lbs U
Eibach 2.5 D 6" long 600 lbs U
Located in Clarkston MI
cgbotha@yahoo.com 248693878two

SHG_EasyE

Parts kicking around:

2" stainless steel reservoir clamps, will fit pretty much any remote setup - $25 shipped




.

.

Steel taper seat lugs, set or 24 so you have some spares. Comes with low profile socket. M12x1.5 - $20 shipped




.

.

Used coolant temp blocks, one with autometer sensor, the other with a 3/8 NPT port. $15 each shipped



.

.

Dynatech Split-Flow Race muffler, 2.5 piping, brand new - $75 shipped
http://www.summitracing.com/parts/dt...4252/overview/



.

.

Eibach ERS springs

800x250x375lbs

$60 shipped



.

.

Hyperco springs

600x250x650

$60 shipped

1200 Hobos

iTrader: (7)

B16 head - $600
Virgin head from 2000 Si. 15,000 Original miles before the owner totaled his car. The seals still look brand new. Includes Distributer, Harness, Valve Cover, Cams, Complete, everything.

Tires:

225/45/15

2 Nitto Nt01 R Compound $120 --- These have lots of life left. Two track days if not more, tons of Autocross.

2 Toyo RA1s R Compound $60 or free if you buy the NT01s. One to two track days if watched, lots of Autocross.

EauRouge

I have a XT Ultra Lap for sale. Asking $140 OBO. Paypal accepted. Send me a PM if interested. Located in SoCal.

Version 2.03
Machined aluminum cases
6 ft cord timer/receiver
Beacon
Download module
Original documentation

10cjennings

iTrader: (1)

^I'd buy those tires if I was local, good deal!.

2fast4u831

Sergio Rocha
Santa Cruz County
831 359 0477
Prices do not include shipping or paypal fees.

(2) Brand new flat black Rota DPT wheels. 17X9 +35 offset. $450.


96-00 civic aem short ram intake. $50.


New 60mm prosport oil pressure gauge. $70


Momo hub for EG/Teg. $40.


MSD 6A box. $80.

Atmosfear

iTrader: (18)

FS: MyLaps Direct Power Transponder

Practically new. I installed it Memorial Day weekend then rolled my car on Memorial Day.

This is a direct powered unit (http://www.mylaps.com/en/products/ca...ransponder/165).

It has never been registered so you will not have to go through the trouble (fees) of re-registering it.

Comes in the original packaging with all stickers, literature, etc.

The wire lead is approx 2 ft. shorter (approx. 5 ft. length) so depending on how you install it you may need to lengthen the wires. There is also some marks on the plastic mounting flanges from where I drilled out the rivets.

Other than that this is brand new.

$400 shipped. PM if interested.

-Harley

94rs-turbo

iTrader: (6)

FS TL-S Brembo calipers front pair $500

heel_touge

Few items For Sale.



Zeal S6, Full aluminum Bodies, Rebuilt by Endless USA in 09'. Comes with Eibach ERS 800.250.0650 and 800.250.0700 $800

ateg2308

This is a brand new in box fx400 clutch. With the clamping force of a full race clutch and engagement like stock. Retails over $420.00 but I am selling hear for $315.00 shipped to your door. PM for details. Everything must go, so don't miss out. Happy Shopping.

kungfuSiR

iTrader: (1)

Looking to sell our brake setup from last year. I'm going to put this together as a packaged turn key deal for however wants to buy it. It will include the following:

- OEM Remanufactured Type R Calipers (Bought June last year from Aurora Acura)
- Machined 23T calliper brackets to allow you to run this setup on 4x100 wheels.
- Brand new 11.1" Prelude Vtec rotors, re-drilled to 4x100 (Brand new)
- 1 Set of almost new Performance Friction PFC01 Pads, they were only used at the CSCS Season Finale Last Year, tons of life left.

This setup is a proven winning combination we never had any issues with the setup.

Pictures


Asking Price:
I'm looking to get $375USD for the whole setup, I would prefer to sell the whole setup complete, shipping can be arranged if needed.

Andrie Hartanto

Concord, CA

Eibach race springs. Like new, only used brief period. I have pair of each. $75 shipped for each pair.

0800.250.0800
0800.250.0900

00IntegrAllmotoR

iTrader: (1)

Also see FS thread

jdmspoonitr

iTrader: (1)

Got some suspension bits for sale off the ITR.

1) Item: AMR spherical tophats $OLD(can be used on coilovers that normally require use of stock tophat)






Item: Omni Coilovers - 12K Front/10K Rear $500
Application: ITR (can be used on any dc2 or EG with ITR rear arms)
Notes: I really liked this setup and you can't beat it for the money. Currently I'm running on Koni Race 8041 and am only a second faster on the Koni Race which cost me more than $1700 to get set up. These are height and shock length adjustable. There is no dampening adjustment, which makes these a simple install and go fast coilover.



Item: Hyperco Helper Springs CS100 - 2.5" Diameter - 4" Free length
Notes: Paid $136 from Amazon. I want 120 shipped. Used for 50 miles.

Item: Genesis Spring Couplers
Notes: 6061-T6 Aluminum. 2.5". Paid $170 from Amazon. I want 150 shipped. Used for 50 miles.

Colin

iTrader: (1)

Raybestos ST43 Brake Pads $100
- Made for ITR/Legend/NSX/Spoon calipers
- Used for one track event, had problems with vibration with this compound so I quickly picked up some Hawk Blues. I think these might just be a bit more "race" than I'm ready for, I'm not sure.
- Paid $240 at Porterfield for these

3" Brake Duct Tubing $25 SOLD
- This the expensive, high temp stuff, not dryer hose from Home Depot
- I think there's ~10'

Brake Ducts $20 SOLD
- Same as these ones from PitStop: http://pitstopusa.com/i-5066469-alls...5-x-9-3-4.html


Also have some more non-race specific stuff here: http://hondamarketplace.com/showthread.php?t=3151854

Atmosfear

iTrader: (18)

I am selling off all of my safety gear. Prices do not include shipping or if applicable, paypal fees. I am giving up racing for the foreseeable future and will be making a thread to part out my car shortly.

SA 2010 HJC AR-10 II helmet, rubbertone black, May 2011 manufacture date. Comes with Hans Pro anchors installed. I will also include the Hans wrenches, sticker, etc.

I believe the size is XL but it may be L. I am posting this on my lunchbreak, I will confirm size tonight and update this thread.

Here is a link to the size chart (once I confirm size) for your reference:
http://ep.yimg.com/ca/I/soloracerdotcom_2263_5328553

Aside from the blemish on the top which is easily seen in the pics, this helmet was lightly used and in very good condition. I wore it for a comp school and approx. 6 Time Trials events.

$200













Alpinestars GP Pro 3-Layer Nomex Suit, SFI 3-2A/5. Black w/ white accents.

Size 54 (L). Click here and scroll down for the Alpinestars Size Chart, http://www.saferacer.com/size-charts/. For reference, I am 5'8" and 180lbs and it fits fine. I would say anyone from appox. 5'7" to 5'9" ish and 160-190ish would fit. YMMV (i.e use the size chart).

Manufacture date of 2009 but I bought it new in 2011. Includes its own storage bag. This suit is still practically new, no stains, rips, holes, etc. I wore this three times and washed it once with Molecule.

The SCCA patch is easily removable if buyer does not want it. The suit has not been exposed to any heat so the patch will come off clean without leaving any residue. I will gladly remove it for you if need be.

$800 obo, I paid $1300 for it and it is barely used.















Alpinestars Balaclava, one size fits all. Lightly used. Worn three times. $40









Alpinestars Nomex Socks, L. Lightly used. Worn three times. $20







Alpinestars Tech 1-ZX gloves, XL. Lightly used. Worn three times. $110









DC Pro-Spec v1.0 race shoes, Size 11. SFI 3.3/5. Worn for approx 6 Time Trials events and a comp school. Still in good shape. $80

cluelessmale

iTrader: (1)

Emmaus, PA

APR Stand off AA-100225 $25


SS brakelines $50

donut.

PM me if interested. Thanks.

I have a ITR rear swaybar. Pretty sure it's 22mm but could be 23mm. $60 takes it.




GSR head. A camshaft broke in this head and took 2 LMA's with it, a few bent valves, and galled a couple camshaft journals. Needs some work. $78.75 picked up in socal.

mugen boy

Bump

Todd00

For sale:

Genuine Mugen Showa N-Zero (NZ) Suspension Damper Kit. Aluminum-bodied adjustable stroke/length coilovers.

They are basically brand new; they only have about 200 miles on them total. Never street driven--just used on an autox car (barely, at that).

Light as a feather and can handle significant springrate, if so desired. They are rebuildable via King Motorsports.

I purchased new through King Motorsports. They retail for $3500.

Fitment (97-01 ITR), 92-95 Civic/94-01 Integra with USDM ITR rear LCA's.`



$2400 shipped to the lower 48, OBO. Also have several sets of standard springs that will work with them that I can include. Rates: 800lb/975lb





location: Ohio.
PM me for quickest response and I'll shoot you my email/phone #.

ALF

Sold

kungfuSiR

iTrader: (1)

Type R LSD
Integra Type R OEM LSD. Bought new 3 years ago and run for 2 seasons of time attack before removing it for a clutch type MFactory LSD. This LSD has probably less than 6000kms on it.
SOLD!!!

Performance Friction 01 Pads New!!!
Brand new set of Performance Friction 01 Pads. These are for Wilwood 6 Piston calipers with pad shapes 7320 and can also be made to fit 7416 however they need to be milled from 20mm to 16.5mm for this to work. These are brand new still in the box and retail for $160USD a set.

Asking $125USD