Built 2003 Mitsubishi Evo 600+ hp

Closed Thread Subscribe

Thread Tools

Search this Thread

04-28-2008, 10:34 PM

BioXide02

Honda-Tech Member

Thread Starter

Join Date: May 2003

Location: Portland, Oregon

Posts: 1,865

Likes: 0

Received 0 Likes on 0 Posts

Built 2003 Mitsubishi Evo 600+ hp

Up for sale is my '03 Mitsubishi Evo. I am the 2nd owner of the car. First off, I REALLY don't want to sell this car, but I need to. Believe me, if I could keep it I would! The car is a blast to drive and very powerful. Everything is still on the car, a/c,p/s ect, nothing has been removed from the car for weight reduction. I have done everything to this car, so everything is done right. No cheap parts or shady work on the car. Right now on pump fuel + meth the car puts out 545 hp with 480 tq. On race fuel it made 590/520 but had to stop there since the stock ignition couldn't do much more. This was all done on a mustang dyno.I have dropped alot of money on the car, over 25K in parts alone! The car currently has 45100 miles. And about ~6K miles since the motor build and all the other parts.

Asking 31.5K

Specs:

Performance :
-2.4 built by English Racing 8.5:1 comp - Eagle rods, coated JE pistons, Eagle Crank, new oil pan,water pump, oil pump, factory gasket kit, timing belt, balance shaft removal kit ect.
-Exedy Triple Disk clutch
-HKS 272 camshafts
-ARP head studs
-ARP rod bolts
-AEM EMS - tuned by English Racing with Feed back from John Reed (RRev)
-RC1200 injectors
-255hp intank
-255hp inline with stock fuel lines AEM turns pump on at 2psi
-English Racing Meth inj kit
-Extreme Turbo Systems T4 61mm turbo kit
-Extreme Turbo Systems 3in Fmic (Still fits behind crash beam)
-Extreme Turbo Systems 2.5in IC piping
-Tial 50mm BOV
-Extreme Turbo Systems 3.5 Turbo Back Exhaust
-Zeitronix ZT2 wideband with black anodized LCD screen that also works as a boost gauge + egt gauge
-Nisei Battery Kit

Exterior:
-Rexpeed vortex Generator
-Rexpeed Gurney Flap
-Rexpeed Carbon Fiber Air Ducts
-Rexpeed Carbon Fiber Front Lip
-Rexpeed JDM Amber Turn Signals
-CarbonTrix Carbon Fiber License Trim
-CarbonTrix Carbon Fiber Bumper Shield
-Evo 7 style taillights painted by EvoDave

Suspension:
-Cusco Zero 2 coilovers tuned by Mueller with Cusco camber plates
-New brake pads
-17" Hyperblack Rota Torque wheels with plenty of tire life left

http://img.photobucket.com/alb...4.jpg
http://img.photobucket.com/alb...7.jpg
http://img.photobucket.com/alb...8.jpg
http://img.photobucket.com/alb...9.jpg
http://img.photobucket.com/alb...0.jpg
http://img.photobucket.com/alb...1.jpg
http://img.photobucket.com/alb...3.jpg

04-28-2008, 11:30 PM

foam

Honda-Tech Member

Join Date: Jan 2005

Location: UW Red Square, Washington, USA

Posts: 4,538

Likes: 0

Received 0 Likes on 0 Posts

FV-QR

bump for fast cars with A/C and P/S

04-29-2008, 06:54 AM

RopethisS2K

Honda-Tech Member

Join Date: Nov 2004

Location: USA

Posts: 1,670

Likes: 0

Received 0 Likes on 0 Posts

Re: Built 2003 Mitsubishi Evo 600+ hp (BioXide02)

bump for a local. Seen this car in person and its super clean and its a beast! Good luck on your sale, sorry you have to sell it! I always new a set of wheels would set it off nicely!