B16A Block, Head, and GSR Trans For Sale WI
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2008
Location: La Crosse, WI
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
B16A Block, Head, and GSR Trans For Sale WI
Have a B16A block Disassembled unsure of the mileage but it is in good condition has 1 broke bolt where the motor mount bolts on, comes with main caps, crank, pistons rods, thermostat housing, water tube, oil pan.
B16A head unsure of mileage was told it was low, good condition, comes with vtec solenoid but i think its a little messed up, no intake mani or valve cover, or dizzy, has cams 1 cam gear has a chip out of it but cams are in good condition.
Will come with a brand new set of ARP head studs still in unopened box.
Also have a GSR Trans got it on craigslist a few weeks ago was told it had no grinds pop outs etc ya know but i never believe anyone so i opened it up and found some problems. Says y80 on the case i counted the teeth on gears to confirm it is a GSR.
This bearing is bad
5th gear syncro spring was broken too
Good parts trans or rebuilder, I was planning on building it and the b16 and boosting but i decided to keep my D for now, If i were to fix the trans i would recommend replacing all bearings, syncros and possibly the 3rd gear since they all seem to grind in these trannys.
Taking offers would like to sell the b16 block head and studs all together.
Located in La Crosse WI.
B16A head unsure of mileage was told it was low, good condition, comes with vtec solenoid but i think its a little messed up, no intake mani or valve cover, or dizzy, has cams 1 cam gear has a chip out of it but cams are in good condition.
Will come with a brand new set of ARP head studs still in unopened box.
Also have a GSR Trans got it on craigslist a few weeks ago was told it had no grinds pop outs etc ya know but i never believe anyone so i opened it up and found some problems. Says y80 on the case i counted the teeth on gears to confirm it is a GSR.
This bearing is bad
5th gear syncro spring was broken too
Good parts trans or rebuilder, I was planning on building it and the b16 and boosting but i decided to keep my D for now, If i were to fix the trans i would recommend replacing all bearings, syncros and possibly the 3rd gear since they all seem to grind in these trannys.
Taking offers would like to sell the b16 block head and studs all together.
Located in La Crosse WI.
#5
Honda-Tech Member
Thread Starter
Join Date: Oct 2008
Location: La Crosse, WI
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16A Block, Head, and GSR Trans For Sale WI
Might be willing to trade for:
15" rims with tires (GSR Blades, Rota's etc..)
24.5" Slicks on 13" rims
ID 1000cc injectors to fit my d series
Bisimoto 3.6 Turbo cam for a Z6
Partial trade for a Holset HX35 Turbo
15" rims with tires (GSR Blades, Rota's etc..)
24.5" Slicks on 13" rims
ID 1000cc injectors to fit my d series
Bisimoto 3.6 Turbo cam for a Z6
Partial trade for a Holset HX35 Turbo
Thread
Thread Starter
Forum
Replies
Last Post
x_heu
Forced Induction
1
03-15-2011 04:51 PM
mannyman2
Vehicles for sale
2
05-03-2008 12:04 AM