Need help!! K20 into a dc2
#1
Need help!! K20 into a dc2
I have a 02' dc5 type s... I wrecked the car and wanted to swap the k into my 99' Gsr... What do I keep from the dc5? Has bolt ons and kpro v3... Also, my Gsr has Jdm 36mm... I heard I can use my Jdm axels... Anything will help... Just need to know what I can keep and use during the swap and what I will need...
Thanks for reading and please anything will help... And yes I've googled but havnt found anyone that totaled a dc5 and wanted to swap over to the dc2... Thanks!!
Thanks for reading and please anything will help... And yes I've googled but havnt found anyone that totaled a dc5 and wanted to swap over to the dc2... Thanks!!
#4
Honda-Tech Member
Join Date: Sep 2004
Location: ORLANDO, FL, USA
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need help!! K20 into a dc2
you don't really need to keep much. you have the key components. axles, ecu, engine, engine wire harness, headers. that's all you really need from your rsx. the other stuff you will have to get to make everything fit and plug correctly!
theres plenty of write-ups on this, if not here; elsewhere. just put in k20 in dc2.
theres plenty of write-ups on this, if not here; elsewhere. just put in k20 in dc2.
Thread
Thread Starter
Forum
Replies
Last Post
dvs94Teg
Acura Integra
1
04-18-2009 06:27 PM