The Beast gets a makeover..
#51
Honda-Tech Member
Thread Starter
Re: The Beast gets a makeover..
new math..
If my math is right, a rear tire .1" smaller than the front puts you about were you need to be.
I also further evaluated the H/Fseries diff in the CRV trans and I'm 99.9% sure I can get it to work!
If my math is right, a rear tire .1" smaller than the front puts you about were you need to be.
I also further evaluated the H/Fseries diff in the CRV trans and I'm 99.9% sure I can get it to work!
Last edited by 88ED8; 11-28-2011 at 12:34 AM.
#56
Honda-Tech Member
Thread Starter
#58
Honda-Tech Member
#59
Honda-Tech Member
#61
Honda-Tech Member
Thread Starter
#63
Honda-Tech Member
Thread Starter
Re: The Beast gets a makeover..
Nothing new really, finished the rear part of the rearend..
Blasted, coated, assembled, & balanced rear diff..
New bearings, new oil seals..
Blasted, coated, assembled, & balanced rear diff..
New bearings, new oil seals..
Last edited by 88ED8; 07-27-2012 at 07:54 PM.
#67
Honda-Tech Member
Thread Starter
Re: The Beast gets a makeover..
Bought some Synchrotech Pro-Series Carbon Fiber lined; 1st -5th synchros, new OEM reverse synchro, and all new OEM synchro springs.
#69
Honda-Tech Member
Thread Starter
Re: The Beast gets a makeover..
Finally got a New H2B kit, gotta thank Seth @ QSD for the great deal/ hook up
Also got the New shoes, gunna start mocking up and building the rear end and get it back on the ground soon!
Also got the New shoes, gunna start mocking up and building the rear end and get it back on the ground soon!
Last edited by 88ED8; 07-04-2012 at 08:25 PM.