**Official H2B Discussion thread **
#1301
Re: (DC4_MADMAN)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4_MADMAN »</TD></TR><TR><TD CLASS="quote">Looks good. Engine bay could use a little cleanup, but other than that.
Get a cowl.</TD></TR></TABLE>
clean up as in dirty or clutterness? it was dirty cuz i cut the hood ;x i cant explane the clutterness ;
Get a cowl.</TD></TR></TABLE>
clean up as in dirty or clutterness? it was dirty cuz i cut the hood ;x i cant explane the clutterness ;
#1302
Honda-Tech Member
Re: (skunked)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skunked »</TD></TR><TR><TD CLASS="quote">
100mph is good for a mid 13. I looked around but I didn't see you or Steve.
I ran another 12.25@110.
</TD></TR></TABLE>
Nice!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lightcrx »</TD></TR><TR><TD CLASS="quote">no comments yet?
any one want a rundown of the time slip ;x ..... its so slow its disapointing
R .551
I1 2.169
I2 5.990
I3 9.116
MPH(I3) 79.689
I4 .000
E.T 14.071
MPH 100.196
street tires
2 step at 4000</TD></TR></TABLE>
You can lower your 60'. What tires were they? MSD or uberdata 2-step?
100mph is good for a mid 13. I looked around but I didn't see you or Steve.
I ran another 12.25@110.
</TD></TR></TABLE>
Nice!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lightcrx »</TD></TR><TR><TD CLASS="quote">no comments yet?
any one want a rundown of the time slip ;x ..... its so slow its disapointing
R .551
I1 2.169
I2 5.990
I3 9.116
MPH(I3) 79.689
I4 .000
E.T 14.071
MPH 100.196
street tires
2 step at 4000</TD></TR></TABLE>
You can lower your 60'. What tires were they? MSD or uberdata 2-step?
#1303
bfg's and msd
once i fix my tranny troubles and put the turbo this thing should be flying...... mmmmmm.... 22 pounds ;x
i also weighted my car at the track, its right a 1900
i should dyno it just to see what im making can you tell by the time slip
setup
stock sleeves(f22a)
arias 8.5?:1 pistons
crower rods
stock h22 head
stock intake mani (butterflys removed)
stock tb
stock header(modifyed of course)
chipped p28 semi street tuned(kinda rich)
460cc
msd(haha)
h2b plate of course
ls 1-2 b16 3-4 ls 5th
i was trying to work with what i got ;x im guessing now ima have to spend money
i have a good hydro ls tranny and i have another hydro ls gear set(blown diff) with 60,000 ;x so no case(well i have it but it has some holes in it)
i need help
Modified by lightcrx at 3:19 PM 10/30/2006
once i fix my tranny troubles and put the turbo this thing should be flying...... mmmmmm.... 22 pounds ;x
i also weighted my car at the track, its right a 1900
i should dyno it just to see what im making can you tell by the time slip
setup
stock sleeves(f22a)
arias 8.5?:1 pistons
crower rods
stock h22 head
stock intake mani (butterflys removed)
stock tb
stock header(modifyed of course)
chipped p28 semi street tuned(kinda rich)
460cc
msd(haha)
h2b plate of course
ls 1-2 b16 3-4 ls 5th
i was trying to work with what i got ;x im guessing now ima have to spend money
i have a good hydro ls tranny and i have another hydro ls gear set(blown diff) with 60,000 ;x so no case(well i have it but it has some holes in it)
i need help
Modified by lightcrx at 3:19 PM 10/30/2006
#1304
Honda-Tech Member
Re: (lightcrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lightcrx »</TD></TR><TR><TD CLASS="quote">bfg's and msd</TD></TR></TABLE>
You can improve your 60'. You spin out of the hole? What was your tire pressure?
You can improve your 60'. You spin out of the hole? What was your tire pressure?
#1305
yea spun first. but you always spin first with street tires ;x tire pressure was at 13 psi, i warmed them up without water. i didnt get very many passes so practice is needed ;x lots
#1310
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Bserious)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bserious »</TD></TR><TR><TD CLASS="quote">
That's awesome Matt!
I should have gone. I ended up spending all day fabbing up one lower control arm.</TD></TR></TABLE>
eh, the race was pretty boring as you could imagine.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lightcrx »</TD></TR><TR><TD CLASS="quote">what class did you run in, i ran in outlaw ;x but i couldnt even get a 13.99 haha. i beat the first guy cuz he red lit ;p
sad part was it felt like she had alot more in her </TD></TR></TABLE>
Street Performance
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbogixxer »</TD></TR><TR><TD CLASS="quote">
Nice!!!
</TD></TR></TABLE>
I like the program especially with the msd pill pulled out
1.65 and a 1.67 60'
That's awesome Matt!
I should have gone. I ended up spending all day fabbing up one lower control arm.</TD></TR></TABLE>
eh, the race was pretty boring as you could imagine.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lightcrx »</TD></TR><TR><TD CLASS="quote">what class did you run in, i ran in outlaw ;x but i couldnt even get a 13.99 haha. i beat the first guy cuz he red lit ;p
sad part was it felt like she had alot more in her </TD></TR></TABLE>
Street Performance
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbogixxer »</TD></TR><TR><TD CLASS="quote">
Nice!!!
</TD></TR></TABLE>
I like the program especially with the msd pill pulled out
1.65 and a 1.67 60'
#1311
Honda-Tech Member
Re: (skunked)
if anyone is interested im having a few flywheel spacers made from steel. i refuse to use anything aluminum anywhere near my flywheel. so if you want to run a steel flywheel i should have the spacer done in a week or so. Ill have about 5 or 6 extra
#1313
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: (lightcrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lightcrx »</TD></TR><TR><TD CLASS="quote">any one know if a cable counter shaft will work in a hydro tranny?</TD></TR></TABLE>
PM bense, he should know.
PM bense, he should know.
#1317
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SB tuning)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SB tuning »</TD></TR><TR><TD CLASS="quote">damn matt another 12.2, i been waiting for that 11 sec pass from you for a minute, hopefully soon </TD></TR></TABLE>
yep, but I think it's time to retire this stock motor and join the big boys
yep, but I think it's time to retire this stock motor and join the big boys
#1318
I'm really 2slow
Re: (skunked)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skunked »</TD></TR><TR><TD CLASS="quote">
yep, but I think it's time to retire this stock motor and join the big boys </TD></TR></TABLE>about time lets see some low 11's
yep, but I think it's time to retire this stock motor and join the big boys </TD></TR></TABLE>about time lets see some low 11's
#1319
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: bitch I live in a fuckin trashcan CT
Posts: 10,590
Likes: 0
Received 0 Likes
on
0 Posts
Re: (skunked)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skunked »</TD></TR><TR><TD CLASS="quote">
yep, but I think it's time to retire this stock motor and join the big boys </TD></TR></TABLE>
bout time Matt!!!
the eastcoast says high.
yep, but I think it's time to retire this stock motor and join the big boys </TD></TR></TABLE>
bout time Matt!!!
the eastcoast says high.
#1320
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: (2FAST4U831)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2FAST4U831 »</TD></TR><TR><TD CLASS="quote">about time lets see some low 11's </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sikciv666 »</TD></TR><TR><TD CLASS="quote">
bout time Matt!!!
the eastcoast says high.</TD></TR></TABLE>
yep, I know it still has more in it but I'm getting fustrated not beating the rest of the SP cars.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sikciv666 »</TD></TR><TR><TD CLASS="quote">
bout time Matt!!!
the eastcoast says high.</TD></TR></TABLE>
yep, I know it still has more in it but I'm getting fustrated not beating the rest of the SP cars.
#1322
Honda-Tech Member
Join Date: Aug 2002
Location: NOR CAL
Posts: 12,464
Likes: 0
Received 0 Likes
on
0 Posts
Re: (2FAST4U831)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2FAST4U831 »</TD></TR><TR><TD CLASS="quote">those damn 23"s were hurting you </TD></TR></TABLE>
yeah a little.
Check out the drift pic yO
yeah a little.
Check out the drift pic yO
#1324
Re: (skunked)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skunked »</TD></TR><TR><TD CLASS="quote">
yep, but I think it's time to retire this stock motor and join the big boys </TD></TR></TABLE>
O'rly?
yep, but I think it's time to retire this stock motor and join the big boys </TD></TR></TABLE>
O'rly?
#1325
Honda-Tech Member
Join Date: Feb 2005
Location: New Joisey
Posts: 9,429
Likes: 0
Received 0 Likes
on
0 Posts
Re: (skunked)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skunked »</TD></TR><TR><TD CLASS="quote">
yep, but I think it's time to retire this stock motor and join the big boys </TD></TR></TABLE>
whats gonna be the setup? or is that top secret for now?
yep, but I think it's time to retire this stock motor and join the big boys </TD></TR></TABLE>
whats gonna be the setup? or is that top secret for now?