holy shit check this out
04-23-2003, 05:48 AM
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: GA
Posts: 2,861
Likes: 0
Received 0 Likes
on
0 Posts
holy **** check this out
[img ]http://www.imagestation.com/my...82845[/ img]
[ img ]http://www.imagestation.com/my...82843[ /img ]
[ img ]http://www.imagestation.com/my...82841[/img ]
[ img ]http://www.imagestation.com/my...82839[ /img ]
4321 compression: 225,220,60,30
sprayin, i got a cel, then a backfire/pop, it was pretty loud, pull the plugs and there you have it.
im expecting the worst as i think about pulling the head tomarrow...what do ya'll think?
[ img ]http://www.imagestation.com/my...82843[ /img ]
[ img ]http://www.imagestation.com/my...82841[/img ]
[ img ]http://www.imagestation.com/my...82839[ /img ]
4321 compression: 225,220,60,30
sprayin, i got a cel, then a backfire/pop, it was pretty loud, pull the plugs and there you have it.
im expecting the worst as i think about pulling the head tomarrow...what do ya'll think?
04-23-2003, 05:54 AM
#3
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: GA
Posts: 2,861
Likes: 0
Received 0 Likes
on
0 Posts
Re: holy **** check this out (laughinxxx)
plate, 80 shot. 22 n20 16 fuel. msd digi 6 timing retard at 3 degrees.
first spray, bogged for a sec then went like hell, then started to bog again
next spray, it kinda of bogged, the sputtered, then bang
when i checked cel it said 10 and 15...there is no 15!
its p72 w/hondata
first spray, bogged for a sec then went like hell, then started to bog again
next spray, it kinda of bogged, the sputtered, then bang
when i checked cel it said 10 and 15...there is no 15!
its p72 w/hondata
04-23-2003, 06:44 AM
#6
Join Date: Jul 2002
Location: Albuquerque, NM, USA
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
Re: holy **** check this out (Sephro)
Why are you having your MSD retard timing if you've got a hondata?
Yeah, those plugs don't look good at all.....let us know how it turns out.....
Brian
Yeah, those plugs don't look good at all.....let us know how it turns out.....
Brian
04-23-2003, 10:27 AM
#7
Honda-Tech Member
Join Date: Apr 2001
Location: CA
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
Re: holy **** check this out (fastludeh22)
I dont wanna be the one telling you, but you're in for a rebuild. Looks like you cracked/broke a ringland. Looking from the spark plugs, also looks like you had major detonation.
start saving up
start saving up
Trending Topics
04-23-2003, 10:32 AM
#8
Honda-Tech Member
Re: holy **** check this out (99_SH)
I'd also reccomend replacing your airbag, or at least cutting it off...
*shameless plug = I have a momo tornado (black/Carbon fiber) for sale* =D
04-23-2003, 11:47 AM
#12
Join Date: Nov 2002
Location: Modelrator
Posts: 679
Likes: 0
Received 0 Likes
on
0 Posts
Re: holy **** check this out (LudeLove)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LudeLove »</TD></TR><TR><TD CLASS="quote">whoa dude u gotta lay of the NOS</TD></TR></TABLE>
Ya that NAWS can sure mess stuff up
Ya that NAWS can sure mess stuff up
04-23-2003, 01:08 PM
#13
Honda-Tech Member
Join Date: Jul 2002
Location: Columbia, Beaufort,, SC, USA
Posts: 3,603
Likes: 0
Received 0 Likes
on
0 Posts
Re: holy **** check this out (smslude)
detionation... gotta love it... do a comp test b4 u pull the head.. my friend did that but his actually was ok. maybe his was just to much heat...maybe but i doubt it
04-23-2003, 01:12 PM
#14
Member
Join Date: Jul 2001
Location: Chandler, AZ, USA
Posts: 2,392
Likes: 0
Received 0 Likes
on
0 Posts
Re: holy **** check this out (BoostedH23a1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BoostedH23a1 »</TD></TR><TR><TD CLASS="quote">detionation... gotta love it... do a comp test b4 u pull the head.. my friend did that but his actually was ok. maybe his was just to much heat...maybe but i doubt it</TD></TR></TABLE>
He already did one....
225,220,60,30
He already did one....
225,220,60,30
04-23-2003, 02:17 PM
#15
Member
Join Date: Oct 2002
Posts: 2,035
Likes: 0
Received 0 Likes
on
0 Posts
Re: holy **** check this out (4bidden)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4bidden »</TD></TR><TR><TD CLASS="quote">
He already did one....
225,220,60,30</TD></TR></TABLE>oh my damn! lol, thats great stuff
He already did one....
225,220,60,30</TD></TR></TABLE>oh my damn! lol, thats great stuff
04-23-2003, 04:56 PM
#17
Join Date: Mar 2003
Location: New Castle, DE, USA
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Re: holy **** check this out (fastludeh22)
seen worse........ this kid (customer) bought these giant crower custom cams for his b16 hatch....... stock head......... we put them in like he asked..... he drove down the street..... we heard him punch it..... at around 9700 rpm **** went boooom...... sent pieces of the piston into the head pieces of the valve everywhere, and the spark plus was down to the white, the threads weren;t even there...... but hey..... that one looks like it is gonna set u back a block too
04-23-2003, 07:54 PM
#18
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: GA
Posts: 2,861
Likes: 0
Received 0 Likes
on
0 Posts
Re: holy **** check this out (93turbolude)
well here's the thing, when i first did it, i didnt realize how bad it was, and drove it over a mile home, LIKE THAT. nothing was knocking, or anything, just ran like **** from the loss of compression.
i was using the msd to retard the timing only when spraying. the hondata ign maps weren't tuned yet, he only did the a/f so i could break in the engine. we looked at them though, he said they were a little aggressive, but nothing crazy. i was going back in 2 weeks when the turbo was on there.
well i was thinking the ringland or something, guess well see how strong endyne rollerwaves, and badger sleeves really are.
well im off to pull the head in the cold and dark, cause i just got dont working 13 hours, and iu have to work 10 more tomarrow.
btw-doenst 225 psi seem kind of high for 9.5:1 pistons.
i was using the msd to retard the timing only when spraying. the hondata ign maps weren't tuned yet, he only did the a/f so i could break in the engine. we looked at them though, he said they were a little aggressive, but nothing crazy. i was going back in 2 weeks when the turbo was on there.
well i was thinking the ringland or something, guess well see how strong endyne rollerwaves, and badger sleeves really are.
well im off to pull the head in the cold and dark, cause i just got dont working 13 hours, and iu have to work 10 more tomarrow.
btw-doenst 225 psi seem kind of high for 9.5:1 pistons.
04-23-2003, 08:19 PM
#19
Honda-Tech Member
Join Date: Aug 2002
Location: Florida
Posts: 679
Likes: 0
Received 0 Likes
on
0 Posts
Re: holy **** check this out (fastludeh22)
damn dude?? you sure you had everything hooked up right? and if your on nitrous and it bogs really bad, that should be your first clue to stop, and you did it again, then drove it home?? sorry but didnt make much sense..your pistons in those cylinders are toast, thats alot of material gone....and you said you were braking the engine in? and your squeezing on it??im lost here
04-23-2003, 08:34 PM
#20
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: GA
Posts: 2,861
Likes: 0
Received 0 Likes
on
0 Posts
Re: holy **** check this out (PreludeRacer023)
it bogged, but not crazy, it was more like it was still to rich. i broke in the engine, it has 2200 miles.
and ya i drove it home, it had a loss in power, but it didnt make any bad noises or anything well i drove it so...
we'll see tomarrow.
and ya i drove it home, it had a loss in power, but it didnt make any bad noises or anything well i drove it so...
we'll see tomarrow.
04-23-2003, 08:47 PM
#21
New User
Join Date: Aug 2001
Location: 7th circle of Hell, AR
Posts: 6,663
Likes: 0
Received 0 Likes
on
0 Posts
Re: holy **** check this out (fastludeh22)
Yeah, bogging is usual with nitrous kits, especially if you are untuned or have low bottle pressure.
If you can please find out how much the timing was advanced.
If you can please find out how much the timing was advanced.
04-23-2003, 08:55 PM
#22
New User
Join Date: Apr 2001
Location: tampa, fl
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Re: holy **** check this out (fastludeh22)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fastludeh22 »</TD></TR><TR><TD CLASS="quote">
when i checked cel it said 10 and 15...there is no 15!
its p72 w/hondata</TD></TR></TABLE>
cel 15 is ignition output sensor.
cel 10 isidle air temp sensor.
this goes for both the p72 and the p13.
sorry for your engine man. sucks.
when i checked cel it said 10 and 15...there is no 15!
its p72 w/hondata</TD></TR></TABLE>
cel 15 is ignition output sensor.
cel 10 isidle air temp sensor.
this goes for both the p72 and the p13.
sorry for your engine man. sucks.
04-24-2003, 11:09 AM
#24
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: GA
Posts: 2,861
Likes: 0
Received 0 Likes
on
0 Posts
Re: holy **** check this out (fastludeh22)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fastludeh22 »</TD></TR><TR><TD CLASS="quote">
well i was thinking the ringland or something, guess well see how strong endyne rollerwaves, and badger sleeves really are.
btw-doenst 225 psi seem kind of high for 9.5:1 pistons. </TD></TR></TABLE>
F*** YA!!!!!!!!!!!!!!! I guess they are a lot stronger then we all thought, including myself!
its only a head gasket!
[ img ] http://www.imagestation.com/my...55147 [/img ]
[ img] http://www.imagestation.com/my...55142 [/img ]
ill get better pics later if wanted, im late for work.
no more jucie for me, till i get it all tuned.
btw- my turbo manni came today so it'll all be too sweet in about a week.!
well i was thinking the ringland or something, guess well see how strong endyne rollerwaves, and badger sleeves really are.
btw-doenst 225 psi seem kind of high for 9.5:1 pistons. </TD></TR></TABLE>
F*** YA!!!!!!!!!!!!!!! I guess they are a lot stronger then we all thought, including myself!
its only a head gasket!
[ img ] http://www.imagestation.com/my...55147 [/img ]
[ img] http://www.imagestation.com/my...55142 [/img ]
ill get better pics later if wanted, im late for work.
no more jucie for me, till i get it all tuned.
btw- my turbo manni came today so it'll all be too sweet in about a week.!
Thread
Thread Starter
Forum
Replies
Last Post
