No ref. voltage crank no-start
03-07-2011, 07:20 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: tampa, fl, usa
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
No ref. voltage crank no-start
So heres the scoop...
91 rex, dx
obd 1 conversion
b16a
wire tucked (i know, i hope this isnt part of the problem)
So I was driving this car last time I was home with no problem.
I came home for spring break and when I went to fire it up, it started for 1.5-2 seconds, then died. Wideband has no power from ecu, and upon inspection there is no ref. voltage at any sensor.
Theres still 12v at the coil (external coil)
This happen to anyone else? HELP!!!
91 rex, dx
obd 1 conversion
b16a
wire tucked (i know, i hope this isnt part of the problem)
So I was driving this car last time I was home with no problem.
I came home for spring break and when I went to fire it up, it started for 1.5-2 seconds, then died. Wideband has no power from ecu, and upon inspection there is no ref. voltage at any sensor.
Theres still 12v at the coil (external coil)
This happen to anyone else? HELP!!!
Thread
Thread Starter
Forum
Replies
Last Post
george91182
Honda Civic / Del Sol (1992 - 2000)
6
04-13-2008 02:11 PM