eklum

so i cant figure out how to install the extended lug studs i got for my ef wagon heres where i got to so far.


ive tried beating on the back of it with a mini sludge and nothing happens. i dont want to keep going that route because im afraid i might damage it.. am i missing sometihng?
this is really pissing me off because ive done almost everything else to this car but i cant figure out how to take the damn hubs off . and ive been sick so its more stressful and annooying than not being sick and working on it.

any input would be helpful thanks

stackedhouse

The hubs have to be pressed out..

mt-fly-boy-25

in for how you figure it out.

4drEF

And for a bonus, you will have to install new wheel bearings when you put it back together.

kaiba

And then everything have to press in.

DCRB

might as well throw in new ball joints while you're in there too

eklum

yeahhhh.. thats how its looking i guess i was right haha i didnt want to be right but i guess i should get used to always being right about everything always. thanks!

OneBadTurboCRV

As am I.

Here is my write-up if you are too cheap to take it to a shop...

https://honda-tech.com/forums/honda-crx-ef-civic-1988-1991-3/write-up-diy-front-wheel-bearing-replacement-2685054/