code 17 after clutch swap
#1
Junior Member
Thread Starter
Join Date: May 2007
Location: SAN DIMAS, ca, UNITED STATES
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
code 17 after clutch swap
i put a staged clutch in my b16 yesterday and its throwing code 17, gauge works ect...everything looks hooked up. the blinks on the ecu is
blink_____blink-blink-blink-blink-blink-blink-blink blink-blink
after the seventh blink it has a pause then blinks twice and starts over, are the two blinks letting me know its starting over or are these blinks counted ,maybe code 19
i also need two axles,what axles will work off what car so i can order
b16 in a rex
blink_____blink-blink-blink-blink-blink-blink-blink blink-blink
after the seventh blink it has a pause then blinks twice and starts over, are the two blinks letting me know its starting over or are these blinks counted ,maybe code 19
i also need two axles,what axles will work off what car so i can order
b16 in a rex
Thread
Thread Starter
Forum
Replies
Last Post
honda06si
Honda CRX / EF Civic (1988 - 1991)
4
02-12-2005 02:54 PM