Ed6 wants to be fast
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2010
Location: Sofia,Bulgaria
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Ed6 wants to be fast
Hello guys, im from a little country in eastern Europe called Bulgaria.
Anyways, my little brother has a 91 Civic D16A6 and he started a build.
He is using PM7 Pistons,D16Z6 head,ebay 4-2-1 headers with 63mm straight pipe,Venom(replica) intake and B16A2-60mm Throttle Body,and a Xtd clutch,
He had shaved the head half mm ,and he is using a frank-gearbox. The engine is just been closed and ,he wonders after tuning what to expect. It's a pretty low-budget build and its a daily driven car. What do you think? What will the dyno show?
Anyways, my little brother has a 91 Civic D16A6 and he started a build.
He is using PM7 Pistons,D16Z6 head,ebay 4-2-1 headers with 63mm straight pipe,Venom(replica) intake and B16A2-60mm Throttle Body,and a Xtd clutch,
He had shaved the head half mm ,and he is using a frank-gearbox. The engine is just been closed and ,he wonders after tuning what to expect. It's a pretty low-budget build and its a daily driven car. What do you think? What will the dyno show?
#5
Honda-Tech Member
Thread Starter
Join Date: Oct 2010
Location: Sofia,Bulgaria
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Re: Ed6 wants to be fast
Haha thank you man, i don't really know if the thread should be posted here...but if we can squeeze 125 at the wheels would be great
Thread
Thread Starter
Forum
Replies
Last Post