jdmxefxsi

ok guys.. i have a 91 ef si hatch that is completly stock besides my 17" rims with 205/40 r17 tires.. i am about to lower it with sprint lowering springs and im trying to decides the drop rate i want.. i can either get 2 1/2" in front and 2" in rear or 3 1/4" in front and 3" in rear.. i wanna tuck all tha way around but i dont wanna scrub.. can i get away with the 3 inch springs with my 17s?

tyked15

no way get 15 inch rims

tonythetuner®

the 17's will most deff rub With a 3 inch drop unless you and negative camber become best friends. And drive around like this lol

rudyndrew

Yea 17s r way too big for any hatch do u have any 15s lying around?

jdm ef8 89

lol fail get 13's then you could drop 4''s

BiG ChOr!Zo

iTrader: (1)

i have a set of them sprint 2.50F & 2.25R lowering springs for sale if you haven't bought them yet...!!!

Old goat

Is that real? IF so holly ****

KINGVEM^^ED6

iTrader: (1)

yeah look on youtube ^

digitally_remastered

heres my old hatch i had with it dumped as low as i could take it on my egay coilovers. thats like 3-4 inches....and this is with 18x7.5's

i had negative camber in the front and in the rear i had it as flush as possible without the rims/tires hitting the fenders. and the front and rear lips were also rolled.


DONT HATE!!!!

hatchet_honda

i hat 17 in enkeis on my 91 si hatch and they rubbed on stock springs when goin over the smallest bump. got some 15s after selling the 17s to some ricer kid with an automatic fo doe (he needed wheels to go with his giant gay *** wing lmao). im still on stock springs. roads around here would be brutal to my car if i did lower it any.

digitally_remastered

sounds like michigan roads to me hatchet...

BlackEM2

had 17s on a crx back in the day probly 2in drop and rear wheels were too wide and hit the fender well on bumps. front wheels rubbed real bad!

if anything get coilovers and adjust to you likings