Where does the Evap hose go?
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: San Diego, CA, USA
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
Where does the Evap hose go?
So I'm trying to swap in a USDM B16A2, coming from having a D16Y7
The B16 was missing the evap sensor/hoses, so I want to transfer my evap sensor and hoses from the D16.
But where does the evap hose connect to the IM on the B16A2 intake manifold?
This is the evap sensor, I'm holding the end of the hose that goes to the evap unit on the firewall:
I'm pointing to where the evap hose connect to the IM on the D16Y7 IM
Here's the B16A2 IM. Is it the nipple on the bottom left? or the one on the top that angles left? I don't know, you tell me
-a
The B16 was missing the evap sensor/hoses, so I want to transfer my evap sensor and hoses from the D16.
But where does the evap hose connect to the IM on the B16A2 intake manifold?
This is the evap sensor, I'm holding the end of the hose that goes to the evap unit on the firewall:
I'm pointing to where the evap hose connect to the IM on the D16Y7 IM
Here's the B16A2 IM. Is it the nipple on the bottom left? or the one on the top that angles left? I don't know, you tell me
-a
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: San Diego, CA, USA
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
Re: Where does the Evap hose go? (hatchi)
I've been told the tiny one on the left is cruise control .... one in the middle is brake booster. one on top is evap hose. Anyone care to dispute?
-a
-a
Thread
Thread Starter
Forum
Replies
Last Post
VI Boost
Honda Civic / Del Sol (1992 - 2000)
5
12-13-2009 12:42 PM