mini me swap i guess help
09-02-2008, 10:59 PM
#1
* B A N N E D *
Thread Starter
Join Date: Feb 2008
Location: DoSe iT MaTTeR, CA, US
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
mini me swap i guess help
oh i have a ZC SOHC head and a d16A2 Block and i was wondering can i mate these two?
Also here a list of questions cause i havent foun NADA on this!
What HG do i use?
What Timming Belt Do i use?
what head studs?
Any anything else i might be missing
i think thats it
Also here a list of questions cause i havent foun NADA on this!
What HG do i use?
What Timming Belt Do i use?
what head studs?
Any anything else i might be missing
i think thats it
09-03-2008, 11:20 AM
#6
Honda-Tech Member
Join Date: Oct 2006
Location: Edmonton, AB, Canada
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Re: mini me swap i guess help (ReactioN)
You haven't found NADA?
the North American Distributor of Auto-parts?
they have convienient locations all across America.
the North American Distributor of Auto-parts?
they have convienient locations all across America.
09-03-2008, 11:33 AM
#7
* B A N N E D *
Thread Starter
Join Date: Feb 2008
Location: DoSe iT MaTTeR, CA, US
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
Re: mini me swap i guess help (marks97el)
hahaha No i meant nothing lol
hey i have another question.if a HG is busted will the head still be good?
hey i have another question.if a HG is busted will the head still be good?
Trending Topics
09-04-2008, 08:15 PM
#8
Honda-Tech Member
Join Date: Nov 2006
Location: columbia, tn, usa
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
Re: mini me swap i guess help (ReactioN)
just derpends how hot the motor got...you can take it to a machine shop and see if it warped...or if you are cheap like me, just take a straight edge and put it on the block side of the head...aluminum head+high heat=usually not good
09-04-2008, 08:43 PM
#9
Honda-Tech Member
Join Date: Nov 2006
Location: Ca
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Re: mini me swap i guess help (dannylikestoast)
all your doing swapping a non vtec head to a non vtec block...everything should be the same....don't take my word for it though...but i'm sure the head gasket for the zc is the same one for the a6..bolts, timming belts and all
Thread
Thread Starter
Forum
Replies
Last Post
1phatEG8
Honda CRX / EF Civic (1988 - 1991)
6
05-11-2009 02:12 PM
