NACvicSi

Ok so I have a LS B18B bottom end getting ready to build. I have ROSS 81.5mm pistons and Eagle H beam rods for the LS. Also have a B16 head. (LS/Vtec build of course).

So today I find a good deal (well assume it's a good deal) on a B17 block. No crank, pistons, rods. The block will cost me about $75. To me that would be worth not having to fool with the conversion it's self. My questions is will the B17 block accept a LS crank/rods and B16 head witout any problems?

I know I am probably going to get flamed for not searching, but I am on my phone surfing and I need to know ASAP. Thanks a million guys

Padawan

No, it won't work. The B17 block has a shorter deck height than the LS.

johnson_productions

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Padawan &raquo;</TD></TR><TR><TD CLASS="quote">No, it won't work. The B17 block has a shorter deck height than the LS. </TD></TR></TABLE>

x2

Lord Milferdeen

Id pick it up for $75 anyways

doood

iTrader: (1)

you need custom rods or pistons to use an ls crank in a b16/17 block

NACvicSi

ahhh damn, so much for that. Was just trying to be lazy and get around the conversion. Will end up being cheaper lol

pdiggitydogg

I thought you could use the b16 rods w/ ls crank?