The buildup begins! (92eh3Si's B18c for boost)
10-09-2005, 10:03 PM
#1
The buildup begins! (92eh3Si's B18c for boost)
Peter (92eh3si) is building up his JDM GSR motor to support some higher boost levels. Me is helping him, and I'll be posting pics as the progress continues!
First pics (10/8/05)
Pulled the motor and removed the head.
Up on the stand.
Got the head off, the cylinders looked good. Normal wear and tear.
Unfortunately we didn't do a leak down before tearing into it.
The turbo..
haha.
More to come! Stay tuned.
First pics (10/8/05)
Pulled the motor and removed the head.
Up on the stand.
Got the head off, the cylinders looked good. Normal wear and tear.
Unfortunately we didn't do a leak down before tearing into it.
The turbo..
haha.
More to come! Stay tuned.
10-11-2005, 11:48 AM
#6
Honda-Tech Member
Join Date: May 2004
Location: 206/425, Wa, U.S.A
Posts: 1,001
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the comments everyone!
planning on re-sleeving, re-honed, and bored out to 81.5mm with some forged wiseco pistons 9:1 CR, eagle rods. not sure how much my turbo can handle. it is a drag kit with t3-t4.. lookin forward to push around 15~18psi and later upgrade to bigger turbo once i get some money. i've made 312whp 207tq with just stock block pushing 10psi and i am shooting for 400+ with some street and dyno tune. i will keep y'all updated and thanks for looking
planning on re-sleeving, re-honed, and bored out to 81.5mm with some forged wiseco pistons 9:1 CR, eagle rods. not sure how much my turbo can handle. it is a drag kit with t3-t4.. lookin forward to push around 15~18psi and later upgrade to bigger turbo once i get some money. i've made 312whp 207tq with just stock block pushing 10psi and i am shooting for 400+ with some street and dyno tune. i will keep y'all updated and thanks for looking
Thread
Thread Starter
Forum
Replies
Last Post
crooklyn_outlaw
Honda Civic / Del Sol (1992 - 2000)
3
09-05-2008 05:14 PM
