Problems with my Accord
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2013
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Problems with my Accord
I had recently purchased accord 92 with 98 accord engine swapped in it by previous owner. F18B is the engine model but tranny is old 92 model with kick down cable.
anyway
On Inspection the pin diagram of my ODB2b ECU i found out few abnormalities.
I have following wires missing from harness.
1. Knock Sensor
2. VTEC Pressure Switch
3. CKF Sensor P side
4. Vehicle Speed Sensor
5. CKF sensor M side
Question is How come car knows when to kick in VTEC ? if it does not have connection to VTEC Pressure switch and Speed Sensor.
My guess is that he has connected VTEC with Pressure switch i guess.
anyway
On Inspection the pin diagram of my ODB2b ECU i found out few abnormalities.
I have following wires missing from harness.
1. Knock Sensor
2. VTEC Pressure Switch
3. CKF Sensor P side
4. Vehicle Speed Sensor
5. CKF sensor M side
Question is How come car knows when to kick in VTEC ? if it does not have connection to VTEC Pressure switch and Speed Sensor.
My guess is that he has connected VTEC with Pressure switch i guess.
Thread
Thread Starter
Forum
Replies
Last Post
dglassmyer
Honda Accord (1990 - 2002)
9
03-12-2012 06:29 PM