H swap fuel issues
#1
H swap fuel issues
What's up yall, I'm new here also new to the honda game. I recently purchased an accord that was h swapped. Its had several issues that the previous owner failed to mention at the time of purchase. Long story short, my h22 keeps blowing fuel lines under the hood. I installed new vaccum lines, and a new fuel pressure regulator.
I never had this issue until I put in brand new motor mounts, which sounds odd. Trust me I know, but I had to jack the motor up almost 2 inches on the drivers side to hit the new mount. The old ones were shot all the hell. Any help is greatly appreciated.
I never had this issue until I put in brand new motor mounts, which sounds odd. Trust me I know, but I had to jack the motor up almost 2 inches on the drivers side to hit the new mount. The old ones were shot all the hell. Any help is greatly appreciated.
#3
Re: H swap fuel issues
It is the feed line out from the back of the motor. It's a complete hack job from the previous guy. He kept the after market fuel rail when he sold it to me. Maybe that's an issue? it has 5/16 rubber lines. Maybe 3/8 will help? Not sure at this point
#6
Re: H swap fuel issues
I will post pics as soon as I get home. Please keep in mind that I bought the car like this and it's a hack job. Whoever had the car before me rigged it all together
#7
Re: H swap fuel issues
I tried several times to upload photos. It would get 50% done and stop. Idk. But I think I may have resolved the issue. I replaced the factory fuel rail, got some new copper washers for the banjo ring and some fuel proof thread lock. That has seemed to fix it. The rubber hoses havent failed, and I just took a 30 min drive for a road test.
The following users liked this post:
Thread
Thread Starter
Forum
Replies
Last Post
Sprockets
Forced Induction
21
12-19-2006 10:09 AM