Ct93CB7

I need to wire in and obd2 dizzy to my obd1 accord. I have pictures of the wires and from both my obd1 wiring harness and my obd2 dizzy which are numbered and im just gonna match up the wires with the same numbers. there are a couple of wires that i dont know what they go to so if neone knows and can help that wuld great

obd1 obd2
CYLP-Orange-2 CYLP-Yellow-2
CYLM-White-1 CYLM-Black-1
TDCP-Orange/Blue-8 TDCP-Green-8
TDCM-White/Blue-4 TDCM-Red-4
CKPP-Blue/Green-3 CKPP-BLue-3
CKPM-Blue/Yellow-5 CKPM-White-5
[/IMG]This is obd1 Wiring harness from car to dizzy obd1
This is the TDC and CKP on the motor

obd1&obd2
Tach-Blue-9
Power-Black/Yellow-10
Ignition input-Yellow/Green-6
[IMG][/IMG]This is the obd2 dizzy
This plug comes from the external coil pak
[IMG][/IMG]
This is also from wiring harness to dizzy obd1

The ones with ?'s i have no idea where they go..... thanx for help

Balwin

It wont work.

The crank angle and top dead center sensors are in different locations between obd1 and 2.

Ct93CB7

Yeah those r the ones on the side of the motor the re, green, blue, and white the match up with the others.... noone else can help me with this...???????