Spark plug Gap size for turbo setup boosting 30lbs.
#1
B*a*n*n*e*d
Thread Starter
Join Date: May 2003
Location: Salinas, CA, U.S.A
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Spark plug Gap size for turbo setup boosting 30lbs.
Hey guys, Im running an H22 Turbo gonna boost 30lbs. and i was wondering what would be the Gap size for for my NGK spark plugs.
#4
Re: Spark plug Gap size for turbo setup boosting 30lbs. (turbotypeR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">very small. probably .025-.028</TD></TR></TABLE>
#5
Honda-Tech Member
Join Date: Jun 2003
Location: NYC bitchessss
Posts: 9,555
Likes: 0
Received 0 Likes
on
0 Posts
Re: Spark plug Gap size for turbo setup boosting 30lbs. (slim9300)
I ran .05 on my 6.5 psi turbo setup, and even with the msd i was blowing out the spark. I went down to .025 and it ran like a champ.
Trending Topics
#8
Honda-Tech Member
iTrader: (1)
Join Date: May 2002
Location: GA
Posts: 2,861
Likes: 0
Received 0 Likes
on
0 Posts
Re: Spark plug Gap size for turbo setup boosting 30lbs. (ndogg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ndogg »</TD></TR><TR><TD CLASS="quote">you will probably need heat range at least 8, maybee 9. and .020 to .028 gap.</TD></TR></TABLE>
not a 9. he may need an 8. i have h22 and zfr7f coppers worked great at 19#/450 whp
not a 9. he may need an 8. i have h22 and zfr7f coppers worked great at 19#/450 whp
#10
Honda-Tech Member
Re: Spark plug Gap size for turbo setup boosting 30lbs. (ndogg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ndogg »</TD></TR><TR><TD CLASS="quote">you will probably need heat range at least 8, maybee 9. and .020 to .028 gap.</TD></TR></TABLE>
Ding ding ding. All motors respond differently, you'll figure out what size you need when you are on the dyno.
Ding ding ding. All motors respond differently, you'll figure out what size you need when you are on the dyno.
#12
Honda-Tech Member
Join Date: Dec 2001
Location: Gresham, Oregon, USA
Posts: 5,418
Likes: 0
Received 5 Likes
on
5 Posts
Re: Spark plug Gap size for turbo setup boosting 30lbs. (boosted hybrid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boosted hybrid »</TD></TR><TR><TD CLASS="quote">As wide as possible before misfire occurs.</TD></TR></TABLE>
Exactly, what ignition are you running? In general at that boost level we're down to ~0.024" with B series motors.
Exactly, what ignition are you running? In general at that boost level we're down to ~0.024" with B series motors.
#13
Honda-Tech Member
Re: Spark plug Gap size for turbo setup boosting 30lbs. (ProjectLudeSiR)
Sal, I'm going to run the NGK #BKR7E .028-.030
When we tuned my car at Trackmasters, Bubba threw in some NGK's with a 9 heat range, but I think that was too cold for my application. Those are gapped at .030.
When we tuned my car at Trackmasters, Bubba threw in some NGK's with a 9 heat range, but I think that was too cold for my application. Those are gapped at .030.
#16
30 psi on a H22??????????
once u get it done i wanna see a link to that page that shows it.....must be sick...
i guess i smell some rich kid asking for a question he should be asking the person who is building his super motor........
once u get it done i wanna see a link to that page that shows it.....must be sick...
i guess i smell some rich kid asking for a question he should be asking the person who is building his super motor........
#17
Honda-Tech Member
Re: Spark plug Gap size for turbo setup boosting 30lbs. (ProjectLudeSiR)
Next Saturday. It's a night event. Daryl said he'll go if I go, but I don't know if he'll run his car.
Here's the link!
https://honda-tech.com/zerothread?id=879778
Here's the link!
https://honda-tech.com/zerothread?id=879778
#18
Honda-Tech Member
Re: (USDM 4G VTEC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by USDM 4G VTEC »</TD></TR><TR><TD CLASS="quote">30 psi on a H22??????????
once u get it done i wanna see a link to that page that shows it.....must be sick...
i guess i smell some rich kid asking for a question he should be asking the person who is building his super motor........</TD></TR></TABLE>
That's kind of harsh! He's just looking to get people's opinion's from there experience.
once u get it done i wanna see a link to that page that shows it.....must be sick...
i guess i smell some rich kid asking for a question he should be asking the person who is building his super motor........</TD></TR></TABLE>
That's kind of harsh! He's just looking to get people's opinion's from there experience.
#19
Re: (TurboChrgd_Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboChrgd_Civic »</TD></TR><TR><TD CLASS="quote">
That's kind of harsh! He's just looking to get people's opinion's from there experience.</TD></TR></TABLE>
i dont mean to be an *******
the answer for his question has been given.. theres no point for me to repeat he has to gap it to ~0.028
and considering this is a webboard and the type of question... seems that he doesnt quite know how much brutal power and money involves for a 30 psi H22
if it does and can afford it.... hey mad props....... he will be one of few....
That's kind of harsh! He's just looking to get people's opinion's from there experience.</TD></TR></TABLE>
i dont mean to be an *******
the answer for his question has been given.. theres no point for me to repeat he has to gap it to ~0.028
and considering this is a webboard and the type of question... seems that he doesnt quite know how much brutal power and money involves for a 30 psi H22
if it does and can afford it.... hey mad props....... he will be one of few....
#25
Honda-Tech Member
Join Date: Jun 2003
Location: On the Prowl, Mo
Posts: 5,391
Likes: 0
Received 0 Likes
on
0 Posts
Re: Spark plug Gap size for turbo setup boosting 30lbs. (TurboChrgd_Civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboChrgd_Civic »</TD></TR><TR><TD CLASS="quote">Sal, I'm going to run the NGK #BKR7E .028-.030
</TD></TR></TABLE>
</TD></TR></TABLE>