4cylfiend

iTrader: (1)

Hey guys, Just had a question about what you guys are setting your Fuel Enrichment Values at and what you are Retarding the ignition to.

My Fuel Enrichment value is: 280
Ignition Retard: -80

When searching the forum, I have seen that most people only Retard the ignition -15 to -30 degrees. My engine builds boost almost instantly with my PTE-6266 with my launch limit at 5400ish.

Does this seem too aggressive to anyone?

Thanks for the input in advance!

Muckman

iTrader: (2)

I dont think -80* is even physically possible. The rotor is touching the other plug wire by then.

4cylfiend

iTrader: (1)

Lol I thought it seemed a little "off" but it seems to work great. I dont know if there is a scaling factor that can actually change the value of whats actually listed in the box but it just worries me because I know that too much Ign retard can cause some serious damage.

4cylfiend

iTrader: (1)

I do have a M&W Pro10 and a MSD HVCII coil if that makes a difference.

Gunmetal_B20_Hatch

iTrader: (9)

doesnt matter...

try dropping it down to around -30