Max Boost Levels for Crower Econo Billet & Eagle I-Beam Rods
I am looking to put together a solid D16 that can put out atleast 200WHP. Just checking to see if anyone has any experience with either the Crower or Eagle H beam rods. I want to be safe, but am not sure if the Crower I beam rods are really needed. Feedback is definately needed.
Re: Max Boost Levels for Crower Econo Billet & Eagle I-Beam Rods (Hybrid)
Originally Posted by Hybrid
If I were you I would put LS rods in for a fraction of the crower economy rods for the same strengh.
But then again, for the price, you can't beat eagle, and I think most guy's have had good experience with them.
Actually how high were you planning to rev till? Cause Ls rods are known to have the weakest rod bolts and are the worst set of rods in the honda line up. My motto is your gonna want to open up the block as little as possible so get it right the first time.....that is unless you are a big baller and have the cash to back it up. Go with the Eagles the econo billets are made in china just like eagles. The crower billets are made here in-house so you get better quality. Thats why you pay $640.00 instead of $350.00
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.