jdm_eg29

I have a p28 ecu that i need to get chipped. I was wondering if anyone here knows about anyone that is authorized by ectune or by anyone really to chip my ecu. If so let me know? thanks

Justin Olson

AEM EMS 30-1050 + connector kit to wire into race car. $850 shipped.

0VtecKiDD

Innovate LM2 BRAND NEW IN BOX NEVER USED with all cables and software an the $75 Exhaust Clamp option


Innovate Motorsports #3806 Air/Fuel Ratio Monitor, LM-2, Digital, Single Channel Wideband, Kit.
I29-3806
This LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 10 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. Carrying Case also included!

Description:
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meters digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.
Features:
• Patented Direct Digital Wideband Technology
• Wideband O2 Compatible with ALL fuel types
• Single or Dual Channel Version Available
• OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
• Log directly to SD card (included)
• Playback log data on screen and/or with powerful LogWorks software (included)
• Large high-contrast graphics LCD
• Built-in RPM converter (direct frequency or with optional inductive clamp)
• 4 fully-differential analog inputs
• 2 configurable linear analog outputs
• Positive lock connectors for all connections
• Innovate MTS serial IN and OUT
• USB connection to your PC
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.

Make an offer

robbieshonda

Vtec Kidd pm sent.


I have a Hondata S200 with boost and datalogger Brand new in the box everything included.

Id really like to trade it for a nice Wideband setup. Like that LM2 ^haha lc-1, plx, ect Must be able to datalog with it.
But I'd also sell it.

$350 obo

Mhollaek9

s300 already socketed in a p28 will include usb cable

$550 shipped

aznvinh

I have an EFI PMS(Programmable Management System) (COMPLETE) for sale. If you know anything about this standalone system..this is real classic and prime for self-tuners since you can use it to tune yourself. This is for obd2b hondas..99+ Si honda civics and 00+ acura integras etc. I am trying to get what i got for it since its never been used besides being plugged up to a car to see if it turns on and it does! Please be sure to look up on this product before actually buying it! Heres a link of a reputable tuner that uses this system http://www.c-speedracing.com/howto/pms/pms.php

I wouldn't know how much it cost now..so im going to list it for 500obo! feel free and email me.

Heres what it comes with (complete, comes with everything besides the original box):

-Management Unit (Purple)
-Cables to car (obd2b)
-Controller with wire (rare)
-3 set options (switch)
-2 floppy disk for laptop tuning! (rare)

pictures check my for sale thread!

http://hondamarketplace.com/showthread.php?t=2443292

pgpbubble

moates ostrich v2. $150
moates hulog $30

SQ is the SQUAD

WTB obd-1 pr4 auto

really cheap ostrich v2 and hulog shipped to 02121 DIRT CHEAP!!!

im: SQ is the SQUAD
email voweeks@comcast.net

i wont see any replys here

stedciv

Wanted to trade

JDM P72 with Hondata S300J installed for US P72 with Hondata S300 installed

i want to run boost control and need the US p72 in order to do that. anyone running allmotor and want to trade?

Robs_B18c

iTrader: (1)

AEM EMS 1040 Perfect working order. $700 shipped

b20vtech

wtb:
a used but still good wideband under 200

migs

WTB: KPRO ECU 02-04. PRB,PNF,PRC, whatever, doesnt matter which one I get. I need cables and software.

My offer is $800 shipped with paypal fee's. OBO.

sander

FS: AEM EMS 30-1070 Hybrid K-Series ECU. Will work with any 02-04 K-Series engine in any car.

Nothing wrong with it, just moving on to another ECU. 1000.00 shipped

zccr-xsi

1.chipped p28 with datalogging includes a base map

37820-P28-A52

100 bucks takes it!!!!

Thizzed Out

looking for a obd1 p28 s300 PM me.

clint g

iTrader: (1)

Neptuned Gsr ecu was running 310 injectors, Supertech valve springs and retainers will post more info once i check the paperwork

pgpbubble

Moates Ostrich V 2.0 $150
Moates Hulog $30

diablodc2

WTB hondata s300 intstelled ina na ecu or neptune rtp installed in an ecu asap

JDM JEFFREY

iTrader: (1)

wtb s300 in a p28 asap have cash on hand

JFK78

FS: Dynapack 4022 4WD Dyno.

It works perfectly, and includes the control cabinet with printer, monitor, keyboard, mouse, on-board wideband o2 sensor, air pressure/vacuum sensor, air temperature sensor, weather station, and both 4-lug and 5-lug wheel adapters. Basically everything needed to operate the dyno. It can be operated in 2WD or 4WD mode. We want to sell this to get a different model 2wd unit since we don't do AWD cars and thus have no need for the AWD capability.

It was purchased new in Mid 2003 for ~$95K. and has seen limited use during much of it's life.

Asking $65K. Please PM or email if interested. Serious inquiries only!

James@SpeedFactoryRacing.net

K20Z1RSX

Want to buy a 06 or 05 if it wil work
hondata reflashed ecu. for a K20Z1 engine in a 06 Rsx type S

GSaura

<found it>

ion_four

I need a ROM read from an old Hondata Stage 3 tune. I'm migrating to a different EMS and don't want to start from scratch, but I don't have a ROM editor license, and Hondata no longer supports this product, anyway.

Is there anyone who can hook me up, or sell me their license/key (assuming that's legit)? If you just want to read it (which is preferred), I can send a ROM, or better yet...if there's someone in the Portland, OR area, that would be great!

bks84

iTrader: (9)

http://www.vr-speed.com/store/innova...uge-p-659.html

Retails for around $180.

I'm asking $120 Shipped (firm). Less than 2 weeks old. I'm having my tunerview display my AFR so having this is kinda redundant.

No bullshitters, if you're not interested don't post. If you don't have my askin' price, don't post. If you're going to offer trades, don't post.

Thank you
Brian

Payment through paypal @ brian (at) azoldschool.com

1qukcb7

WTB: Hondata s300 need asap!