Skunk2 Alpha Rods
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2004
Location: Alton, Illinois, USA
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Skunk2 Alpha Rods
Any experience with them? I have an old set of Manley H beams that I was gonna use, but I figure maybe I'll just sell 'em and get a fresh set. I was looking at the skunk2 alpha rods. Before somebody tells me that they are chinese rods... I know. So are Manley's and Eagle's and K1's and BC's and on and on and on.
I'm only planning for 400whp or so. Pretty much any aftermarket rod will do that as long as there are no metallurgy flaws and improper machining. I've ran a cheap set of eagles with success in the past, I just thought that the skunk2s looked a little beefier.
I'm only planning for 400whp or so. Pretty much any aftermarket rod will do that as long as there are no metallurgy flaws and improper machining. I've ran a cheap set of eagles with success in the past, I just thought that the skunk2s looked a little beefier.
#2
DO IT ON ALL FOURS
Re: Skunk2 Alpha Rods
#3
Honda-Tech Member
Thread Starter
Join Date: Jul 2004
Location: Alton, Illinois, USA
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Re: Skunk2 Alpha Rods
#4
Re: Skunk2 Alpha Rods
Ya know, being made in China isn't necessarily bad. They are becoming one of the worlds largest manufacturing companies.
The key I think is whether the company contracting the product out to China utilizes an ISO 9001 cert company with their specs.
Much like Brembo blanks. They come from china but from an ISO 9001 manufacturer so as long as Brembo kept their specs as they had previously, the blanks will be just as good 99% of the time.
I suspect Skunk2 is utilizing ISO 9001 manufacturers for their Alpha equipment.
The key I think is whether the company contracting the product out to China utilizes an ISO 9001 cert company with their specs.
Much like Brembo blanks. They come from china but from an ISO 9001 manufacturer so as long as Brembo kept their specs as they had previously, the blanks will be just as good 99% of the time.
I suspect Skunk2 is utilizing ISO 9001 manufacturers for their Alpha equipment.
#5
Honda-Tech Member
Thread Starter
Join Date: Jul 2004
Location: Alton, Illinois, USA
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Re: Skunk2 Alpha Rods
Ya know, being made in China isn't necessarily bad. They are becoming one of the worlds largest manufacturing companies.
The key I think is whether the company contracting the product out to China utilizes an ISO 9001 cert company with their specs.
Much like Brembo blanks. They come from china but from an ISO 9001 manufacturer so as long as Brembo kept their specs as they had previously, the blanks will be just as good 99% of the time.
I suspect Skunk2 is utilizing ISO 9001 manufacturers for their Alpha equipment.
The key I think is whether the company contracting the product out to China utilizes an ISO 9001 cert company with their specs.
Much like Brembo blanks. They come from china but from an ISO 9001 manufacturer so as long as Brembo kept their specs as they had previously, the blanks will be just as good 99% of the time.
I suspect Skunk2 is utilizing ISO 9001 manufacturers for their Alpha equipment.
#6
Re: Skunk2 Alpha Rods
It's just like you said. Just about everything is made in China. Xboxs, Iphones, tvs, OEM car parts. Quality products can be made there if that is what is demanded. The real problem with China is that there are manufacturers that are willing to make absolute trash with 0 care for patent laws and that there are American companies that are willing to peddle the ****.
Thread
Thread Starter
Forum
Replies
Last Post
Beto_619
Southern California (Sales)
5
05-23-2016 07:29 PM