rice a roni

iTrader: (1)

Well I ordered a standard set of main, rod, and thrust bearings from ebay and got them today.

Rod bearings are just plan bearings, thrust look the same, but the mains...

Half of the mains are grooved, the other half are blank. Which ones go where?

I know that I'll need to plastigauge the bearings and replace the ones that I need to have the proper clearance, but I wanted to use these as a reference set first.

Thanks.

1HGEJ2

iTrader: (1)

groove in the block
blank in the caps

rice a roni

iTrader: (1)

Thanks...Looked at my main caps today. Luckly, I left the old ones in there. :D