my 09 SFWD "OUTLAW" build!!
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: PBIR once called MOROSO
Posts: 2,337
Likes: 0
Received 1 Like
on
1 Post
my 09 SFWD "OUTLAW" build!!
well 2 start off this is what the car was. a simple setup.
this was my first serious build
96 teggy ls
gsr motor
pt6776HO,
Crower rods & cams,
CP pistond,
ferrera vales ect..
neukin ramhorn mani
A1000, fuel system with 1000cc inj
stock gsr trans with quaif, 5.9 axels, exedy twin clutch
whatever else is in the pics, but that covers the specs.
10.32 at 148 with 640whp. had ran same ET at 133 back when it had 512whp , just couldent get the car 2 launch the same. oh well
some improvements were made but no new pics
this was my first serious build
96 teggy ls
gsr motor
pt6776HO,
Crower rods & cams,
CP pistond,
ferrera vales ect..
neukin ramhorn mani
A1000, fuel system with 1000cc inj
stock gsr trans with quaif, 5.9 axels, exedy twin clutch
whatever else is in the pics, but that covers the specs.
10.32 at 148 with 640whp. had ran same ET at 133 back when it had 512whp , just couldent get the car 2 launch the same. oh well
some improvements were made but no new pics
Last edited by ALL IMPORT; 03-26-2009 at 07:02 PM.
#2
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: PBIR once called MOROSO
Posts: 2,337
Likes: 0
Received 1 Like
on
1 Post
Re: my 09 SFWD "OUTLAW" build!!
Now onto the rebirth of this battered beast.
just got finished upgrading the car from an 8point cage 2 a 10 with parachute.
( friendly advice dont mess with am 8 point just get the 10 from the get) pisses me off!!
the jojo front end still hasn't arrived was holding off for that but guess it will be here next week. the car is going to paint as soon at the front end gets here & is fitted up.
here the car is almost a year ago just before the market really crashed. started working on it & hade to hold off cause new house came first. sucked ***! damn wife
(notice the clean pipes)
just got finished upgrading the car from an 8point cage 2 a 10 with parachute.
( friendly advice dont mess with am 8 point just get the 10 from the get) pisses me off!!
the jojo front end still hasn't arrived was holding off for that but guess it will be here next week. the car is going to paint as soon at the front end gets here & is fitted up.
here the car is almost a year ago just before the market really crashed. started working on it & hade to hold off cause new house came first. sucked ***! damn wife
(notice the clean pipes)
#5
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: PBIR once called MOROSO
Posts: 2,337
Likes: 0
Received 1 Like
on
1 Post
Re: my 09 SFWD "OUTLAW" build!!
here was the last mode to the cage.
didnt like the seat being so high with the new halo bar so decided to make some custom brackets. deff was a pain in the ***!!
all said & done i only got this little *** sticker.
didnt like the seat being so high with the new halo bar so decided to make some custom brackets. deff was a pain in the ***!!
all said & done i only got this little *** sticker.
Trending Topics
#11
Honda-Tech Member
Join Date: Mar 2006
Location: Newark, DE
Posts: 6,381
Likes: 0
Received 0 Likes
on
0 Posts
Re: my 09 SFWD "OUTLAW" build!!
Nice, whats the new setup going to be?
What were your short times on your old 500hp setup and do you know the approx weight?
What were your short times on your old 500hp setup and do you know the approx weight?
#16
Honda-Tech Member
Re: my 09 SFWD "OUTLAW" build!!
Subscribed!
Gonna watch this build very closely. I love SFWD Integras, it excites me to see more of 'em built! ;-) I use Tony1 and Joe as inspiration to build mine.
Gonna watch this build very closely. I love SFWD Integras, it excites me to see more of 'em built! ;-) I use Tony1 and Joe as inspiration to build mine.
Last edited by Silva Bullit DC4; 03-29-2009 at 02:44 PM.
#18
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: PBIR once called MOROSO
Posts: 2,337
Likes: 0
Received 1 Like
on
1 Post
Re: my 09 SFWD "OUTLAW" build!!
if i can remember correct my 1/8 mile was right around 6.65-6.85 around 110-117mph cutting mid 1.63-1.74 60fts biggest thing i regret is not dataloging as much. deff will be better this round alot learned from the street setup
lol NO, going with the jojo front end was supposed to be here this week but didn't show up. was waiting to fit it up then post. oh well.
the motor is getting shiped out this week so should have that back soon. the car is going for paint so things are starting to move. forward once again.
as far as specs for the new build . few ideas running .
fullrace mani this time. dual w/gate syst
precision turbo. 76mm billet wheel. might need 2 be custom made not sure yet
waterman mechanical fuel pump.
water/air cooler
coil on plug setup.
E&J autoworks throttle body ( hope it works out good) testing new waters with it.
still not shure on the intake mani yet, cant decide.
as far as trans still waiting on the PPG testing & R&D if not Liberty
alots more as well. deff going to be a well put together car. hopfully.
basically going to get the motor in the car with the mani turbo cooler piping throttle body ect.. the main setup & then start making my decisions carefully.
i wouldent say no expense spared but deff want to get the best of the best where it is needed. as was the street build .
but we will see deff going to be fun. will deff be some things in the car that have not been done yet. stay tuned
lol NO, going with the jojo front end was supposed to be here this week but didn't show up. was waiting to fit it up then post. oh well.
the motor is getting shiped out this week so should have that back soon. the car is going for paint so things are starting to move. forward once again.
as far as specs for the new build . few ideas running .
fullrace mani this time. dual w/gate syst
precision turbo. 76mm billet wheel. might need 2 be custom made not sure yet
waterman mechanical fuel pump.
water/air cooler
coil on plug setup.
E&J autoworks throttle body ( hope it works out good) testing new waters with it.
still not shure on the intake mani yet, cant decide.
as far as trans still waiting on the PPG testing & R&D if not Liberty
alots more as well. deff going to be a well put together car. hopfully.
basically going to get the motor in the car with the mani turbo cooler piping throttle body ect.. the main setup & then start making my decisions carefully.
i wouldent say no expense spared but deff want to get the best of the best where it is needed. as was the street build .
but we will see deff going to be fun. will deff be some things in the car that have not been done yet. stay tuned
Last edited by ALL IMPORT; 03-28-2009 at 02:11 PM.
#20
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: PBIR once called MOROSO
Posts: 2,337
Likes: 0
Received 1 Like
on
1 Post
Re: my 09 SFWD "OUTLAW" build!!
shooting for late summer. but deff for the last event of the year hopefully. alot of $$$ sucks ***. theses rich people need to start building houses again. lol
#23
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: PBIR once called MOROSO
Posts: 2,337
Likes: 0
Received 1 Like
on
1 Post
Re: my 09 SFWD "OUTLAW" build!!
LMFAO.fun night, that was when it had a single 6 puck & it was toasted.i knew i shouldent of gone out that night. got the exedy twin the next week.
actually i have a pic of the clutch after that night.
u can actually see the groves in the pic on the pressure plate.
also the new twin. sexy beast. now its rusted up from sitting in my garage for 8 momths, FL sucks for rust.
but a few slips & she will clean up
actually i have a pic of the clutch after that night.
u can actually see the groves in the pic on the pressure plate.
also the new twin. sexy beast. now its rusted up from sitting in my garage for 8 momths, FL sucks for rust.
but a few slips & she will clean up