When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts! 2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it. 3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned 4) NO WTB ADS! 5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE 6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings
Fluidyne Dual core half sized aluminum radiator with Blox 12" slim fan and black silicone race Samco hoses. Was used on my turbo GSR without any issues. Never seen any overheating and does not leak! <b>Asking $300 OBO<b>
Hello honda tech here to try and sell some stuff.
All prices are with out shipping or paypal fees.
I live in Blythe,CA so shipping to east coast can be spendy.
I use UPS also.
Shoot me offers and for questions.
contact me either here or via text message (760-984-4210)
GO-Autoworks A/C compatible 2.5 in down pipe with 3in exit has 2 o2 sensor bungs, Go-Autoworks cast manifold, and Turbonetics T3/T04 brand new turbo. i would like to sell these altogether. All these parts are brand new and have only been mocked up.-$600
Fuel injector clinic 775CC injectors with pigtails. Brand new never been used
-$200
Turbo XS dual stage boost controller brand new never been used.-$75
Older used Tial 38mm wastegate with 7psi spring in it.-$100
SFWD motor for sale I have receipts of everything done to them this motor only has a few dyno sessions I wasn't able to finsh the car so rather then it just sit id rather let someone else injoy it the most power it made was one 890hp pull I ran out of full so we installed a 8 injector setup and never got to finish it motor was run with brad penn oil price is 4500 see pics below
Selling my spare motor !! b20vtec
1800 OBO
prefer text 352-299-4653
Specs are:
B20b block 84mm
Cp pistons 9:8:1
Eagle Rods
Arp headstuds
B16 head stock valves
Dual valve springs & retainers
New valve seals
New cam seals
New Gates Timing Belt
Stage 1 cam (type r spec)
Skunk2 pro series cam gears
Skunk2 gen 1 intake manifold
Stock throttle body
Ls/vtec sandwich plate and lines included.
Oil pan tapped for Turbo drain
Ebay Clutch & lightweight flywheel Good condition
0 miles on block only idle time and 0 miles on head swap no idle time. Motor needs to be broken in.
Needing to sell a few items to fund my new build. All parts are used and in good condition. Prices do NOT include shipping and paypal fees. Buyer will be responsible for that. Serious inquiries only.
PM or text for faster response. 580-382-1661
PRICE DROP ON CAMS/ROCKERS!!!
Drive Shaft Shop 5.9 axles for B series. Only used these for 2 dyno sessions and around 7 passes on them, 3 of which were only half passes. Used a flow control valve to reduce shock through the drive train. Hubs are currently installed in gsr knuckles, can remove if you need them. Axles have been sitting for 2 years. There is a little rust, but the boots are still sealed and in great condition. - $1000 w/out hubs, $1100 with hubs.
High lift all motor B series roller cams w/Ferrea roller rockers. Cams are TB Motorworx custom. These cams made 335+whp with a 98mm stroke and other supporting mods. I made 270 on 89mm stroke. Great cams! Cams alone cost $1600 PM IN: 0.558" lift 263 duration, EX 0.513" lift 271 duration (serious inquiries only) - $1250 shipped for both rockers and cams.
Last edited by hondaracing84; 01-14-2016 at 11:46 AM.
NOTICE SOME PARTS HAVE BEEN SOLD .
some of you might remember this project so here it is all laid out for sale.
almost every part is brand new never been used or ran except a few small misc parts.
so much extra info on everything its to much to say so if you are serious about purchasing here is my contact info.
if you have any questions u can call me ( talking instead if text is way faster & easier to communicate IJS). Tim 561-644-3876
I am willing to do package deals on basically everything, I will even part out the motor.
The list.
chassis shell. comes with front & factory tail lights all harnesses & interior (doors are quick release) 1,500$
jojo front end.(6 zeus comes off in 1pc) 500$
front control system with
(ceramic wheel bearings & traction bars) 800$
custom rear end ( willwood light weight) 650$ SOLD
Strange suspension 850$ SOLD
rims & tires. front & rear(exospeed 15,s 26x10) 2,200$
rear wing system 250$
Strang chute(blue) & mechanical release 750$
meziere water pump set-up 320$
I AM WILLING TO DO A DEAL ON THE ROLLING CHASSIS with parachute & all parts u see in the pic. minus rear custom arms & shocks, they are sold. but can get factory stuff back on.
Tim 561-644-3876
engine was built by TEX BRE Motorsports.
u can call to verify anything. motor is fully
built & ready to make 1000whp+
no expense was spared.
BLOCK
LS crank
Darton sleeves O-ringed
GRP aluminum rods
billet girdle
CP 10.1 pistons upgraded pins
ATI Damper
Moroso alumimun oil pan
9k for commplete long block. BLOCK IS SOLD>
Head
GSR head 5 axes CNC port
RARE MOROSO valve cover..
Ferrea roller system.
BRE custom Ferra turbo cams, valves, EVERYTHING.all the goodies...
turbo system Setup.
PT 7275-B Billet wheel & Ball bearing. 2,000$ SOLD
dual Tial 44MM MV-R gates. 550$ SOLD 1 ::: 1 left
custom manifold (Backpurged) 500$
Custom BMC intake. 1,500$
misc parts list
Aem data gauge 100$
Sparco seats 250$
sparco harnesses 150$
dble gauge holder 75$
Tach Auto meter 100$
Aem fuel rail with line & guage 130$ shipped
anythying else u see just ask , lol
No longer need this. So it's up for grabs. Complete kit includes...
Motec m4 box (unlocked: data logging, lambda, and advanced tuning)
Motec ignition expander
Motec Bseries engine harness
M&W pro14
T1 cam trigger kit (includes: black golden eagle cam gear with magnets)
CBR coils (4)
In cab floor Ecu Mount included
This kit is ready for the track. Almost plug and play just Hook up acouple of wires to chassis and ur ready for the track. Everything mentioned above is wired up to harness. Everything is boxed up and ready for shipping $2400shipped pp and insurance included. 818-674-2585
*Please Read Whole AD*
1) I will not part out any of the packages do not PM me asking to sell you 1 rim/tire. If they are posted together in a package with a total price they will NOT be separated.
2) The prices are firm if you do not like them please do not PM me, if you offer less then my asking price I will not respond.
I have bought and sold lots on here so buy with confidence. I can provide numerous vouches if you require. All prices are shipped and in US dollars you must pay paypal or send as a gift. I am located in Canada but do not let this stop you from buying. Do not bother lowballing me I will completely ignore them. If you don't like the prices feel free to buy elsewhere.
Text or pm 306 551 5139
- K20/K24 Inline pro Fully built motor - Purchased from Jr Hurley himself. Built by inline pro. $4500 USD Shipped anywhere in canada. The US will be extra for shipping WILL NOT TAKE IT APART 22006 Acura RSX Type S - K24 Drag Build
specs
InlinePro Race K24 block
K20 head
InlinePro billet crank
InlinePro main studs
InlinePro head studs
ACL Race bearings
CP Pistons
InlinePro connecting rods
InlinePro custom billet cams
InlinePro Stage 4 head package
InlinePro oversized stainless steel intake valves
InlinePro Inconel exhaust valves
InlinePro bronze valveguides
InlinePro machined rockers
InlinePro valvesprings
Supertech valves
InlinePro closed-deck sleeves
InlinePro cylinder O-rings
InlinePro notched block
- Turbosmart 60mm Wastegagte BNIB - SOLD
- G-force Long series K series complete Shifter(used but not a lot)- $850 shipped
- Weldon Fuel Filter new - $80 shipped
- Weldon FPR - $180 shipped
- BNIB Precision Dual Ball bearing 67mm GEN2 Turbo- sold
- 8 ID1000's (used but in great working order) - sold
- K-tuned 90mm new only mounted TB does not come with with flange as I had planned to order a new one - Sold
- k series Sheepey Built brand new never mounted or used Manifold(t4 single scroll) Up pipe(4") and Up tube - $1150 shipped
-K series DSS 5.9 axles spindles and hubs. Purchased used from CLM motorsports - sold
- AEM V2 EMS for k series swap - sold
- K series Comp Twin disk(used on the street for a short period) - $675 shipped throwout bearing included but not pictured
- ALL in Fab centre feed K series Manifold with 90mm opening, 8 Injectors New only mounted - Sold
-FCS 7 Gallon Fuel cell new never used - $650 shipped
- 800+hp Fuel System(off EG coupe) - $700 shipped
- Dual Bosch 044's
-8an Feed/Return braided line
-Fuel Filters
-JW Fab 5 gallon Fuel cell
-$800 shipped the Aeromotive FPR
- BNIB Hybrid racing performance z3 shift cables - Sold
- K-Tuned Traction Bar BNIB for eg- $300 shipped
- Hybrid racing AC/PW steering Delete kit - sold
- Precision GT4294(71mm turbo rated between 500-800HP) T04 Twin Scroll, AR.98, 4" band outlet- Minor chip on 1 fin. This turbo was used but very little only some dyne time and a few passes at 500hp. - $450 shipped
- Eg With B series front mount 900hp Garrett Core 3" in and out with 3" aluminum piping (dent on the outlet flange of front mount from shipping and piping) - $350 shipped
- j's racing e.g. front lip fiber glass painted red -$250
- EG CF Hatch complete with tail lights only mounted - 350 shipped
-APR CF Mirrors for eg (needs to be re cleared) - $150 shipped
*Please Read Whole AD*
1) I will not part out any of the packages do not PM me asking to sell you 1 rim/tire. If they are posted together in a package with a total price they will NOT be separated.
2) The prices are firm if you do not like them please do not PM me, if you offer less then my asking price I will not respond.
I have bought and sold lots on here so buy with confidence. I can provide numerous vouches if you require. All prices are shipped and in US dollars you must pay paypal or send as a gift. I am located in Canada but do not let this stop you from buying. Do not bother lowballing me I will completely ignore them. If you don't like the prices feel free to buy elsewhere.
Text or pm 306 551 5139
- K20/K24 Inline pro Fully built motor - Purchased from Jr Hurley himself. Built by inline pro. $4500 USD Shipped anywhere in canada. The US will be extra for shipping WILL NOT TAKE IT APART 22006 Acura RSX Type S - K24 Drag Build
specs
InlinePro Race K24 block
K20 head
InlinePro billet crank
InlinePro main studs
InlinePro head studs
ACL Race bearings
CP Pistons
InlinePro connecting rods
InlinePro custom billet cams
InlinePro Stage 4 head package
InlinePro oversized stainless steel intake valves
InlinePro Inconel exhaust valves
InlinePro bronze valveguides
InlinePro machined rockers
InlinePro valvesprings
Supertech valves
InlinePro closed-deck sleeves
InlinePro cylinder O-rings
InlinePro notched block
- Turbosmart 60mm Wastegagte BNIB - SOLD
- G-force Long series K series complete Shifter(used but not a lot)- $850 shipped
- Weldon Fuel Filter new - $80 shipped
- Weldon FPR - $180 shipped
- BNIB Precision Dual Ball bearing 67mm GEN2 Turbo- sold
- 8 ID1000's (used but in great working order) - sold
- K-tuned 90mm new only mounted TB does not come with with flange as I had planned to order a new one - Sold
- k series Sheepey Built brand new never mounted or used Manifold(t4 single scroll) Up pipe(4") and Up tube - $1150 shipped
-K series DSS 5.9 axles spindles and hubs. Purchased used from CLM motorsports - sold
- AEM V2 EMS for k series swap - sold
- K series Comp Twin disk(used on the street for a short period) - $675 shipped throwout bearing included but not pictured
- ALL in Fab centre feed K series Manifold with 90mm opening, 8 Injectors New only mounted - Sold
-FCS 7 Gallon Fuel cell new never used - $650 shipped
- 800+hp Fuel System(off EG coupe) - $700 shipped
- Dual Bosch 044's
-8an Feed/Return braided line
-Fuel Filters
-JW Fab 5 gallon Fuel cell
-$800 shipped the Aeromotive FPR
- BNIB Hybrid racing performance z3 shift cables - Sold
- K-Tuned Traction Bar BNIB for eg- $300 shipped
- Hybrid racing AC/PW steering Delete kit - sold
- Precision GT4294(71mm turbo rated between 500-800HP) T04 Twin Scroll, AR.98, 4" band outlet- Minor chip on 1 fin. This turbo was used but very little only some dyne time and a few passes at 500hp. - $450 shipped
- Eg With B series front mount 900hp Garrett Core 3" in and out with 3" aluminum piping (dent on the outlet flange of front mount from shipping and piping) - $350 shipped
- j's racing e.g. front lip fiber glass painted red -$250
- EG CF Hatch complete with tail lights only mounted - 350 shipped
-APR CF Mirrors for eg (needs to be re cleared) - $150 shipped
Dual 044 pumps, T1 hanger, Weldon Filter's, -8 an line. Just pulled it off the car the other day to upgrade. Fuel used was e85 and the filters are a few month's old, everything in working order.
couple sfwd parts for sale
fastest way to get a hold of me is text me @ 316-308- four three six nine
sheepy ff mani t4 open 60mm wg 800 shipped new
cp pistons9:1 comp 81.5 upgraded wristpin 600 shipped
sls topmount manifold t4 divided dual 44mm wg heat coated 600 shipped
pic drag coilovers 18k r 12k f 700 shipped (pic not posted) text for pics
weldon fpr with fittings and gauge 200 shipped
T1 catch can with block fittings and lines 300 shipped
skunk2 eg camber kit only mounted 180 shipped text for pics
sheepey ic for ff manifold 840 shipped
dual 044s 200 shipped
borg warner turbo 1.44 exhausting 72mm 900 shipped
$1000 Shipped - 706-346-6024
Center section just received new bushings and balancing!
Turbine housing is thermal coated black
Turbine Wheel is thermal coated!
Thermal coated Comp cover silver(believe it or not)
1.25 a/r, makes plenty of power
Last edited by SPOOLINmatt; 01-31-2016 at 10:58 AM.
Weld wheels fs no trades
15x9 nothing wrong with the wheels have no need for them anymore. If interested message me your number and I will contact you.
$700+shipping and PayPal fees
Located in Cali
time has come for me to move on im selling my sfwd shell im moving onto other things so she has to go heres the parts list.please see pics somethings I may forget things in the pics. the front end needs paint it has overspray the motor is not included but is for sale in a different tread tools in the car not included.also the front rims and tires are not included there a friend of mines so you will have two steelies to tow the car
price 6000
10pt roll cage done by fast car industries
chute
exospeed 3 piece front end
blox drag suspension brand new only installed
ds 5.9 axles with hubs
magna fuel pump 4303
nrg fuel cell need to be clean has old fuel in it same as the pump
avid solid mounts
Weldon fpr
cnc stage brake
brembo cross drilled rotors all around
Last edited by ls_on_boost; 01-23-2016 at 01:08 PM.
Clutch master fx700 twin disc b series clutch
Had it for awhile no street use, on drag car maybe less than 75 miles
Asking 700 plus shipping
AEM v2 obd1 asking 700
setup for cam trigger
Tail bov (used) 150
Msd7al-2 (part number 7224) with 3 step and rpm module selector
Asking 300 obo
B18c Manley turbo tuff rods with arp bolts
Asking 450
T1 cam trigger (2 bracket, 2 sensor, 1 bracket was custom to fit a topmount turbo) with harness has no cam gear asking 300
Wildwood rear brake setup from Fastbrake asking 350 AMS/NLR1000 boost controller with two solenoids asking 650RC440
came from k series 200
I have for sale my Hondata S300 V3 setup with p28 ECU. I am also including the Hondata CPR kit with wire harness and everything needed for the setup. I also have the stock GSR distributor that was setup up to run the CPR setup with the billet cover.
This setup was on my car and was supporting over 900whp horsepower without any issues at all. This setup has been absolutely great but it is time for me to move to Motec.
Everything mentioned above and in the pics below I am willing to sell for $900 and I will take care of the Paypal Fee and shipping.
01-02-2016, 05:24 PM
Jan FS Thread
AMS/NLR1000 boost controller with two solenoids asking 650RC440 
AMS/NLR1000 boost controller with two solenoids asking 650RC440 
