boostedcivicsir

Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 1-1-2010, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings.

chrisdiz

..$2900. obo

1989 crx si
milano red-black top / wings west - mugen style body kit (urathane)
clean title
est. 160k on body
semi built motor (by LDL) -1996- full gsr (b18c) about 500 miles on motor.
eagle rods, je pistons 9.8:1, golden eagle block guard, arp studs
stock gsr head with skunk2 intake mani.
1000cc precicion injectors
aem fuel rail
aeromotive fuel pressure regulator
msd 6al / blaster coil
msd 2step
msd launch control module
NOS external booster fuel pump
skunk2 coilovers w/ tokiko blues / energy bushings
arp extended wheel studs
full race front cross-member / full race radiator
Auto meter phantom tach w/ shift light
Auto meter air/fuel
Auto meter fuel pressure gauge
place racing motor mounts
place racing shift linkage
S1 cable tranny / shifts clean no grinds
ACT stage III clutch / heavy duty pressure plate
moroso battery box
sparco sprint driver seat /stock pass. seat
Sparco racing harness
back half gutted / 91' si clean door panels
91' rear tail lights
will come with steel wheels
car is not running right now because i sold the old turbo kit and was in process of converting to obd1. (will include obd1 dizzy / clipover harness) missing ecu and 4wire o2

so its a basically turbo ready car..

The welds are SOLD!

702-266-5679 text me any questions for faster response

dyno76

iTrader: (1)

prices do not include shipping or paypal fees!!

DSS stage 2 axles for a D series less than 50 miles on them..$350.00 obo

clutchmasters stage 4 clutch with lightened flywheel came off D16z6 less than 50 miles used to break motor in...$ 450.00 obo

2 D series trannys make offer!!

SpeedSceneScott

THIS CAR IS SUPER LIGHT!


CRX drag car, 1991 with three K motors, tranny and tons of parts.
(motors are stock, one is complete and running, two are disassembled & complete, but missing one head) Motor and trans and clutch is in the car.
Fiberglass one piece front clip, doors, and rear hatch.
Almost all new and way too many to list. Car has NHRA certified 4130 chro-moly cage.
New paint, New Lexan, 2 brand new clutches including one high doller , Fresh Gear-Speed trans with zero miles on it with spool, New fuel cell, New Hasport mounts, New axles, New traction bar, Koni shocks, more more more.
All welding and fab work done and painted. Fuel cell mounts, battery mount, interior tin work, everything fabbed and painted.
Not running, needs wiring and header and ECU.
Have Pink slip.

With just a little work, this car would be ready to race.

http://s976.photobucket.com/albums/ae248/scottlucky/

>>>>>>>>>>>>>>>>>>>>NOW JUST $2700.00 <<<<<<<<<<
Call 714 342-6485
Located in Orange county, not far from Disneyland.

bads2k

driveshaft shop stg 2.9 kseries swap axles eg/dc $400 shipped only 8 passes on them
k20 ep3 stock gears and syncros. some new some used lmk what you need many available
autometer sport comp gauges mechanical oil psi,boost,water temp $40 each $100 for all 3
k20 ep3 brand new whole 3rd gear set from honda.$130

E Town DSM

** New Low Prices**

fs- afi t4 top mount divided\twin 44mm manifold - $700

Precision Turbo 6768 billet with .96 exh housing-journal bearing. Was ran a few times on dyno nothing above 20 psi(was on a domestic) $1350

golden eagle scatter shield b series- 150

c02 setup for a boost controller includes regulator, bottle,mount, larger fill station with transfer hose pm me for details


All prices do not include shipping or paypal
Pics Upon Request

BlownHatch

k20 ep3 trans no grinds shifts perfect=550.00 obo
brand new never instaled avid k series EG mounts=250.00 obo
all parts do not include shipping or pay pal fees!
will do a package deal for both 750.00+shiping and pay pal fees

boosted hybrid

Brand new custom Bogart 15x11" with 4.5" backspace R/T 4 spoke wheels with ultralight weight double beadlocks (weighs pounds less than standard beadlocks). Polished beadlocks, outers and black anodized centers. Comes with a brand new set of M/T 26x10's on them. Only mounted and used for mocking purposes, these are the most killer wheels that Bogart can make! Super light, strong and ready to go. Took several months to get these custom made. Clears factory knuckles with NO grinding at all, these are a drop in wheel! Tires are balanced on the wheels, so these are ready to run!

$2200.00 obo.

94turbosi

iTrader: (1)

aem 10 chanel driver box $ 150
precision 1000cc inj $200
jg b16 eldelbrock intake manifold $200
str throttle body with tps 70mm $200
b16 head full ferrea valvetrain port and polished $1200
full race turbo kit complete ramhorn t3/4 Garret 67 mm all vband 700 whp kit
Big back door Intercooler complete kit ,tial 44 mm wastegate 50 mm blowoff
Valve all hoses and t bolt clamps $2500 obo
gsr trans quaife and mfactory 3.0 first gear new syncros and sliders $1200
all prices do not include shipping and paypal fees

pm for pics serious buyers only please

poorboy44

Brand new still in box. 6262 billet T4 .68 a/r dual ceramic ball bearing. Asking $1,300.00 shipped or best offer *paypal fee's not included*

I'm now open to reasonable offers

zakura R

Any ??? Call or text 978-944-3095

Turbo smart 60mm power gate 5 pass on it !!!!!!SOLD!!!!!!!

Garrett intercooler 18x12x4.5 !!!!!!!!!SOLD!!!!!!!

H2b foward facing t4 turbo manifold !!!!!!!!!!!!SOLD!!!!!!!!!


H22 ignition set up msd coil with dizzy and msd 6AL $300 ship


H22 H-bem eagle rods big bolt like new $250 ship

Automotive pro series fuel pump 5 pass on it with 12an 100 micron filter $400 ship

Autoworks

Selling a few parts that wont be used on the new build:
Condition and pricing listed by each part:


1. DSS 2.9 Axles (non ABS): Less than 10 passes on them, in 100% PERFECT shape. Non ABS. Best axle you can buy! $650 for the pair

2. SPEC Twin Disc D16 clutch: Less than 10 passes on the clutch, perfect shape $850.00

3. Innovative 88-91 Civic D series w/ Hydraulic D trans mounts: These are the mounts and rear tranny bracket only. This is what it takes to physically bolt the setup in the car. I didnt use the tranny actuator and do not have it. It is not included (my car was converted to full hydro). Recently upgraded to 95A by Innovative $250, all in MINT shape

4. OBX D Series LSD/Transmission: THE TRANSMISSION HAS A SHREDDED 2nd GEAR. It will need a synchro set and 2nd gear. Every other gear is fine, no grinds, no synchro issues. LSD is fine, case is fine as well. $250

5. Ramhorn T3/44mm combo: This setup will come with 3 open downpipes:
- one downpipe has a 3" vband for BEP turbo housings
- one downpipe has a 4 bolt flange for standard 4 bolt T3 housings
- one downpipe has a 2.5" vband flared to 3" for Precision T3 housings
$575 for the manifold, dumptube w/ downpipes. All downpipes are open end. 2 of them are wrapped. All in great shape

6. Vented valve cover, S Catchcan w/ drainback and lines $250
-will come w/ billet line seperators as well

7. PTE 6262 .82 a/r vband, ported S cover. Used, dyno time and less than 10 passes Perfect shape $800

8. The 3 -6AN fuel lines +1.
-Filter to rail (added length for non OEM filter location
-rail to regulator
-regulator to stock return
-additional rail to stock filter location line
$80

All prices are + shipping. Reasonable offers will be considered. Thanks

josh green

Contact: Cell (706) 266-7294, call or text, feel free to PM me as well.
Items are located in NW Ga.
Prices are negotiable, will ship.

ACT Streetlite flywheel 12.5lbs for B series honda engines, could use resurfacing, $125.

ShawnR

hogans intake manifold b16/itr head flange, set up for 8 injectors, does not come with throttle body

*1000*








miller (nrg-tech) spec head ported by them with all ferrea valve train and rollers, valves and guides have 5 dyno pulls on them still brand new

*2650* obo

Garage 808 Hatch

Weldon 2035 pump, new in box from T1. $700

Spearco A2W IC $200

CX racing A2W IC 3.5" in and out 11x12x4.5 core. has been pressure tested $200

CX Racing Aluminum 1/2 size radiator with FAL fan. $200

Bogart Flystar fronts 15x8 one is warped from weld to strengthen back. $200

SHELL - 89 Honda CRX Si. carbon fiber sunroof plug, MB products Fiberglass 1 piece front end with custom air dam, MB fiberglass doors with lexan, held in by stainless bolts,
MB fiberglass hatch, MB fiberglass rear bumper, MB rear straight axle conversion with Wilwood dynalite calipers and 10.2" rotor hooked to CNC staging brake, not hooked to pedal. Back halfed, aluminum rear panels, rear lower diffuser, small DEKA battery located in front ouf left rear wheel, but not in divers compartment. shut off switch in rear bumper,Auto meter gauges all black Faced. Monster Tach up to 11k, 2 5/16 0-50psi boost gauge, 2 5/16 Water temp, 2 5/15 oil pressure, all mechanical gauges. Kirkey Aluminum seat with black cover have to check size its a larger one though
10 point NHRA certified cage to 8.50 or 180mph. Swing out on drivers side, parachute mount, Crow ent window net, and belt, Sheetmetal Dash, Custom Traction bar setup in front, OMNI Power coilovers, Ready for B series Motor.Wheelie bars with Wheeleze wheels. painted Charcoal grey. All lexan is done, car was very stable 165mph. $4000

WILL NOT PART OUT SHELL PARTS. selling rolling chassis







All prices are OBO, and do NOT include paypal fees or shipping.

PM me an e-mail address or cell number and I can send pics of most parts

I WILL NOT SHIP OUTSIDE OF THE U.S.A.

And will only ship to confirmed addresses.

B18c1turboedEK

iTrader: (1)

AEM ECU OBD2B 1010 has hall effect upgrade....Asking 650
AEM Injector Driver asking 150
AEM twin Fire System. asking 225, Not one in the picture. I have a black one Aem sent me, that is my old twinfire
Msd Digital 7 with coil asking 350.
Precion Intercooler, back door sytle asking 350

Plus shipping and 3% paypal fees

redboost10

M&W Pro-12 CDI Ignition Box with 4 Honda CBR coils
Prologger Wideband and Boost Controller Kit with 2 ngk wideband sensors
AEM 5bar Map Sensor
T1 cam trigger sensor
Mil-Spec Tefzel wire/Raychem DR-25 heat shrink/Deutsch connector harness
4 relays for radiator fan, vtec, fuel pump, ignition
VSS integrated into it with output for the stock cluster
Alternator line integrated into the harness

(2) tial 44mm wastegates with 11.6 psi and 4.3 psi springs and clamps

Pm me offers

portenio78

iTrader: (1)

FOR SALE:
15x8 XXR brand new rims with M&H 24.5x8.5x15 slicks. These fit 4x100 hondas and has 4x114 for Accords.
$400

00ITR #543

Garrett GTX-4294R Turbocharger (GTX-R Series), 1.44 a/r back end. Turbo has about 50 dyno passes on it and about 15 track passes.

$1800 obo

Also fs Full Motec M4 System. Full PNP Setup. You get the whole setup. Everything is integrated through the ecu harness and works together. Plug everything up and start the car setup. Comes with basemaps for ID2200cc injectors and PTE 1600cc. Includes the following:

- Motec M4 ECU unlocked with datalogging
- Full integrated Milspec harness with dtm connectors
-T1 Hall Sensor Cam trigger setup with GEM cam gear
- M&W Pro 10 ignition with modified Distributor and cap
-Crane PS92 Coil
-AEM 5 bar map sensor
-Prologger Boost Controller and Wideband integrated into Motec for wideband readout and boost by gear control through Motec

$2500 obo

MrParks

brand new blox 76mm tb. 200.00

FCSFab.com fuel cell. used -10 and -8 return. mint cond. used for display local shop. 325.00

JamaicanDave

franks fiberglass hot rod style front end


600 obo

nonvtecallmotor

Liberty gearset B-series used $3500

Competition clutch twin disk C-level pressure plate NEW $900

Borg Warner S400SX "aka S372" with race cover used only a hand full of passes $900

TopEndUSA

iTrader: (1)

The short block and components are at T1's shop so I do not have pictures of them at the moment, but Tony can vouch for me on those parts:

-New Golden Eagle HD sleeved H22a4 Block, Oringed standard bore, comes with copper wire, crank, brand new arp main studs, high flow oil pump with prodrive oil gear-all for $1275 shipped obo
-H22 Manley Turbo Tuff Connecting Rods-BNIB- $600 shipped obo
-T1 Spec Custom JE Pistons (made for high high boost)-BNIB-$675 shipped obo
-AEM EPM-BNIB-$195 shipped
-H22 Prodrive Drag Spool. Has no miles on it, just installed in the tranny then removed. New Honda bearings already installed, comes with the final drive. Spool alone without bearing sales for $525, I'm asking $375 shipped plus paypal fees.
-Brand new custom made ceramic coated H22 top mount turbo manifold $700 shipped
-New tial 38mm MVS wastegates $225 shipped (2 available)
-Greddy Type R Wastegate 47mm, used it on my last setup made 745whp at 32psi, no boost creep. Retails between $900-1000, I'm asking $350 shipped plus paypal fees

BlueByYou

brand new spec clutch twin disc $1000 shipped

h22 civic

silver pro comp 2.1/16 water temp gauge 100-250 temp=30 bux
silver pro comp 2 1/16 0-100 oil psi gauge 40 bux
aem wide band gauge with new sensor 175 bux
silver sport comp monster tach 10,000 with adjustable rpm setting and external shift light=175 bux
phantom 2 1/16 0-100 psi mechanical fuel gauge 30 bux
phantom 2 1/16 30psi boost gauge 40 bux
96-00 civic 2 gauge cluster bezel 30 bux
autometer low oil psi pencil warning light with 15 psi sensor=40 bux
2 gauge pillar mount for 2 1/16 gauges fits 96- civic/integra =25 bux
00 civic si cluster 175 bux
aem twin fire and aem pencil coils make offer
aem 30-1020 ems for obd2 already setup for coil on plug with a few h22 turbo programs in it $600
ferrea roller rocker setup for h22 with h22 all motor roller cams mint like new $1500 or just sell cams seperate( pm for cam card)
2-24.5x8.5x15 m&h slicks lots of meat left work good 200 bux
2- 15"x7" rota sub zeros flat black look new 5x114.3 very light weels 200bux

2- 205 50 15 mickey thompson et drag radials basically brand new used for 1 day of photo shooting (not 1 burn out on them) sold
5x114.3 bogarts slicks and skinnys plenty meat left sell all for $1000
full msd setup will sell cheap blaster2 coil 6al msd wires etc

fullrace_t3 t67ho turbo 82 back/70 front housing p trim wheel no probs at all make offer___
zex dry nitrous kit mint 250 bux
misc stock h22 stuff pm with needs_________
__________________
Attached Images

__________________