parts galore
08-06-2009, 05:18 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: panama city, florida
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
parts galore
just another one of those gettin out of the game post
prices are obo and shipping is extrA
if using paypal + fees
-GM map sensor with pigtail $75
-AEM 1020 ecu 750 with complete obd2 uncut harness
works with:
96-98 Civic
96-99 Integra
96-01 Prelude
96-97 Accord
but if you use the harness u can put it into any car
$750 with harness
-26" slicks 26x10x15 and 26x4.5x15 skinnies mounted on some bogarts
$1500
-Turbo XS dual stage manual boost controller $200
-RC 1000cc $200
-AEM FUEL RAIL WITH AEM REGULATOR $175 (H-SERIES)
-New Fire Supression system $300
-PWR water to air intercooler with heat exchanger and fan $500
-H22 obx oil pan $100
-AEM wideband o2 cut harness but could be soldered back $100
-1996 h22 fully built motor and trans $3500
ran fine before i pulled the motor no smoke no anything!
Motor:
Ferrea valves
Crower valvesprings and retainers
Crower Turbo profile cams
Darton sleeved & cryo-treated Block
Eagle H-beam 650 hp rods w/ ARP bolts
ARP head bolts
9:1 Endyn Weisco Rollerwave Pistons
Tranny & Drivetrain:
Cryo-treated all internals and rebuilt @ 75k (there were no issues, just wanted a fresh tranny for the extra power!)
Quaife LSD
Clutchmasters Stage 5 twin-plate clutch
gator axles
-crx race car rolling chassis. The chassis has over $8K worth of chromoly work done to include a chromoly straight rear axle.
The car will come on steelies. with the one piece front end and wheelie bars etc...
buy it all for $6500 and youve got yourself a fast car... all that its missing is a fuel pump and time
best way to get a hold of me is email
mrhuybui@gmail.com
thanks
prices are obo and shipping is extrA
if using paypal + fees
-GM map sensor with pigtail $75
-AEM 1020 ecu 750 with complete obd2 uncut harness
works with:
96-98 Civic
96-99 Integra
96-01 Prelude
96-97 Accord
but if you use the harness u can put it into any car
$750 with harness
-26" slicks 26x10x15 and 26x4.5x15 skinnies mounted on some bogarts
$1500
-Turbo XS dual stage manual boost controller $200
-RC 1000cc $200
-AEM FUEL RAIL WITH AEM REGULATOR $175 (H-SERIES)
-New Fire Supression system $300
-PWR water to air intercooler with heat exchanger and fan $500
-H22 obx oil pan $100
-AEM wideband o2 cut harness but could be soldered back $100
-1996 h22 fully built motor and trans $3500
ran fine before i pulled the motor no smoke no anything!
Motor:
Ferrea valves
Crower valvesprings and retainers
Crower Turbo profile cams
Darton sleeved & cryo-treated Block
Eagle H-beam 650 hp rods w/ ARP bolts
ARP head bolts
9:1 Endyn Weisco Rollerwave Pistons
Tranny & Drivetrain:
Cryo-treated all internals and rebuilt @ 75k (there were no issues, just wanted a fresh tranny for the extra power!)
Quaife LSD
Clutchmasters Stage 5 twin-plate clutch
gator axles
-crx race car rolling chassis. The chassis has over $8K worth of chromoly work done to include a chromoly straight rear axle.
The car will come on steelies. with the one piece front end and wheelie bars etc...
buy it all for $6500 and youve got yourself a fast car... all that its missing is a fuel pump and time
best way to get a hold of me is email
mrhuybui@gmail.com
thanks
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post