bergercurtis

Hello,

At a crossroads with my turbo project here. I am posting this as a feeler before actually selling any parts, but looking to see interest in what I have and how quickly everything could go. Everything listed is brand new in box, and I could provide receipts if needed. Post or PM with interest in any of the following. Pictures to come.

-Precision 5431E - T3 .63 A/R 5 bolt Ford style flange EWG - cost $775 new
-Go-Autoworks ramhorn manifold, downpipe, and dump tube - T3, 2 bolt 38mm, 5 bolt Ford, 2.5" - cost $960 new
-Tial 38mm F38 EWG - cost $240 new
-Walbro 255 fuel pump with kit for EF/CRX - cost
-Synchrotech L3 ('88-'91 Si) MFactory LSD transmission with carbon synchronizers - cost $1500 new
-Innovative Mounts D-series (red bushings 75A) 3 mount EF/CRX motor/transmission mounts - cost $
-Innovative Mounts EF/CRX crossmember/traction bar - cost $
-RC 750cc saturated Injectors with B/D series fuel rail o-rings and B/D series clips - direct fit - not new but cleaned and serviced by RC - unused since
-D16Z6 shortblock machined .020" over, decked, honed, ready for boost with 8.8:1 Wiseco forged pistons, Eagle H-beam rods, Clevite bearings,notched girdle (all torqued and machined) - asking $500
-Freshly rebuilt D16Z6 head with a 5 angle valve job- stock cam, springs, retainer, VTEC solenoid included. OEM valve guide seals- valve lash set- ready to bolt on - asking $250
-Much more..

Odds and ends from new distributors to AN hose and fittings. EF/CRX intercooler charge piping and fuel pressure regulators. Basically a genuinely complete kit to have a boosted car minus the tune. Will cut a deal with someone who buys everything as a whole. Great chance to get everything in one shot, brand new at a discount. PayPal preferred. Will accept wire transfers, cash, and certain vehicular trades. No checks, money orders.

Post or PM. Will post pictures tomorrow, January 19th, 2017. I finally have the parts back in my possession and am looking to sell quickly. Thanks in advance.

rstewart4328

I could use the Walbro 255 and the ef d series mounts. What are the prices?

rstewart4328

I could also use intercooler piping, down pipe, oil lines if you have them.

bergercurtis

Pictures attached. (484) 538-3336 Text please

Edit: Mods, I have attempted to upload the pictures several times and they do not load. I have submitted a tech support request with the site admin. Whenever I go to post, the text box is filled with advertisements and I cannot type. The only way I'm able to type is in the source code. This is not my browser. I've tried on several devices- it's on the account. Please assist me in getting this fixed..

I have all the pictures with Honda-Tech, my username and date listed in my CL ad, but I don't think the site rules permit linking to CL.

cityofcaterpillars

sent pm and text

92_civic_eg

Pm'd

Alex Trebek

iTrader: (2)

Possibly interested in the head, depending on what shipping would be to Detroit. Might also be in Lansdale in a couple weeks for local pickup.

bergercurtis

Give me a call or text. I'll check shipping if you give me a zip or address.

Block sold locally to cityofcaterpillars. Enjoy. If a mod could assist me with removing this messaging block, I can still only type in the source code and not standard messaging. It's preventing me from posting pictures.
(484) 538-3336 text/call

enemyEk

Was interested in that shortblock and some other odds and ends. I was talking with you through email a bit then didn't hear from you. thought you may have sold everything. I sent you my number through email if you have anything left get in touch with me. Thanks

FlyNLow1987

How much for the injectors? Thanks.

tony_2018

I could use whatever is highlighted in yellow above your thread. Do you have that?

FlyNLow1987

Pm sent.