FS: pt71gtq, pte, sfwd stuff, afi turbo manifolds, tilton, b-series & d-series parts - tons of stuff
#1
Honda-Tech Member
Thread Starter
FS: pt71gtq, pte, sfwd stuff, afi turbo manifolds, tilton, b-series & d-series parts - tons of stuff
Im doing some garage cleaning...most of this stuff is either new or in almost perfect condition. All prices are OBO but please no low ballers, im not in a hurry to sell and you know how much this stuff costs new. Im in socal (san diego area) - but willing to ship anywhere. Paypal prefered. Pictures below.
Catch me on aim, liam821, if you have questions or PM me here on honda-tech.
AFI b-series t4 divided topmount (dual wastegates) with 4" downpipe & dumptubes SOLD
AFI d-series ramhorn turbo manifold $500
PTE pt71gtq .68ar T4 turbo /w vband exhaust - 800+whp turbo $1200 (BRAND NEW)
pte pt750 FMIC $400 (BRAND NEW)
tilton twin disk with hydro throwout bearing SOLD
JG b16a pro-series race head (2mm over sized valves, designed to work with a 84mm bore, huge turbo port, dual valve springs, TI retainers, no cams. 318cfm) SOLD
GE scattershield SOLD
PTE 1600cc injectors SOLD
prodrive spool $200 (used, but in perfect condition)
gen3 dohc ZC $2500 (i really dont want to split it apart - buyer gets it all)
oil pan to valve cover - you get it all
Golden Eagle sleeved 75mm std bore
Crower Billet Rods
Wiseco 9:1 turbo pistons
ARP headstuds
JG Pro-series race head with large turbo port, 1mm oversized SS valves, TI retainers
JG 1001 race cams
JG sheet metal intake manifold
JG cam gears
STR fuel rail
fully balanced and blueprinted motor
JUN 10pound flywheel (was balanced with motor)
ACT xtr6 clutch (new disc with only 50 miles maybe)
obd1 dohc ZC alternator
8-10k miles on motor, oil changed every 1000 miles, perfect compression all the way across (almost all freeway miles, drove to colorado twice, utah, and Oregon)
engine made 386whp @ 23psi with my old setup and crappy turbo. 330whp on 91 octane pump gas. This is a 550whp setup with the right turbo setup. Motor was in my 93 civic EG hatch.
http://liam821.com/pix/video/l...5.wmv <-- video of the motor on the dyno - my old turbo/turbo manifold/intake manifold setup (amazing sound!!!)
Hydro ZC tranny (ie S20 SI tranny, no grinds shifts smooth, 40mm input spline) $350
Cusco RS D-series 1way LSD $750 (40mm input spline size - AWESOME LSD!! Cusco part number LSD 117 F - SUPER SUPER RARE)
Raxles equal length axles with half shaft $250 (Has the larger 40mm input spline size)
Will sell tranny/axles as whole and give you a killer deal if you want it all. A great setup - zero torque steer. Will work with any 92-00 civic with a d-series.
AFI b-series topmount (not actual picture but looks the same)
pt71gtq
AFI d-series manifold and my dohc ZC monster
http://liam821.com/pix/index.p...13-04 <-- dohc ZC JG head (click the link, a bunch of pictures)
http://liam821.com/pix/index.p...19-05 <--- the intake manifold
http://liam821.com/pix/index.p...25-03 <-- dohc ZC motor build pictures
Cusco LSD
Tilton twin disk
JG b16a race head
PTE 1600cc injectors
thanks,
liam
Modified by liam821 at 12:11 AM 4/13/2007
Modified by liam821 at 11:37 PM 4/13/2007
Modified by liam821 at 1:32 AM 4/17/2007
Modified by liam821 at 1:34 AM 4/17/2007
Catch me on aim, liam821, if you have questions or PM me here on honda-tech.
AFI b-series t4 divided topmount (dual wastegates) with 4" downpipe & dumptubes SOLD
AFI d-series ramhorn turbo manifold $500
PTE pt71gtq .68ar T4 turbo /w vband exhaust - 800+whp turbo $1200 (BRAND NEW)
pte pt750 FMIC $400 (BRAND NEW)
tilton twin disk with hydro throwout bearing SOLD
JG b16a pro-series race head (2mm over sized valves, designed to work with a 84mm bore, huge turbo port, dual valve springs, TI retainers, no cams. 318cfm) SOLD
GE scattershield SOLD
PTE 1600cc injectors SOLD
prodrive spool $200 (used, but in perfect condition)
gen3 dohc ZC $2500 (i really dont want to split it apart - buyer gets it all)
oil pan to valve cover - you get it all
Golden Eagle sleeved 75mm std bore
Crower Billet Rods
Wiseco 9:1 turbo pistons
ARP headstuds
JG Pro-series race head with large turbo port, 1mm oversized SS valves, TI retainers
JG 1001 race cams
JG sheet metal intake manifold
JG cam gears
STR fuel rail
fully balanced and blueprinted motor
JUN 10pound flywheel (was balanced with motor)
ACT xtr6 clutch (new disc with only 50 miles maybe)
obd1 dohc ZC alternator
8-10k miles on motor, oil changed every 1000 miles, perfect compression all the way across (almost all freeway miles, drove to colorado twice, utah, and Oregon)
engine made 386whp @ 23psi with my old setup and crappy turbo. 330whp on 91 octane pump gas. This is a 550whp setup with the right turbo setup. Motor was in my 93 civic EG hatch.
http://liam821.com/pix/video/l...5.wmv <-- video of the motor on the dyno - my old turbo/turbo manifold/intake manifold setup (amazing sound!!!)
Hydro ZC tranny (ie S20 SI tranny, no grinds shifts smooth, 40mm input spline) $350
Cusco RS D-series 1way LSD $750 (40mm input spline size - AWESOME LSD!! Cusco part number LSD 117 F - SUPER SUPER RARE)
Raxles equal length axles with half shaft $250 (Has the larger 40mm input spline size)
Will sell tranny/axles as whole and give you a killer deal if you want it all. A great setup - zero torque steer. Will work with any 92-00 civic with a d-series.
AFI b-series topmount (not actual picture but looks the same)
pt71gtq
AFI d-series manifold and my dohc ZC monster
http://liam821.com/pix/index.p...13-04 <-- dohc ZC JG head (click the link, a bunch of pictures)
http://liam821.com/pix/index.p...19-05 <--- the intake manifold
http://liam821.com/pix/index.p...25-03 <-- dohc ZC motor build pictures
Cusco LSD
Tilton twin disk
JG b16a race head
PTE 1600cc injectors
thanks,
liam
Modified by liam821 at 12:11 AM 4/13/2007
Modified by liam821 at 11:37 PM 4/13/2007
Modified by liam821 at 1:32 AM 4/17/2007
Modified by liam821 at 1:34 AM 4/17/2007
#3
HT White Ops
iTrader: (4)
Join Date: Oct 2005
Location: Ova Thur, United States
Posts: 6,116
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: pt71gtq, pte, sfwd stuff, afi turbo manifolds, tilton, b-series & d-series parts - tons of s
Did you pull that picture from JG's website? Thats a GSR head you have depicted!
#4
Honda-Tech Member
Thread Starter
Re: FS: pt71gtq, pte, sfwd stuff, afi turbo manifolds, tilton, b-series & d-series parts - tons of s
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SD_Lurker »</TD></TR><TR><TD CLASS="quote">Did you pull that picture from JG's website? Thats a GSR head you have depicted!</TD></TR></TABLE>
No, the pictures above is the picture of the head in selling (i took them myself). The head was enlarged to 84.5mm, and then deshrouded (ie the GSR like combustion chamber). The core was a 1999 b16a (civic SI) head.
liam
No, the pictures above is the picture of the head in selling (i took them myself). The head was enlarged to 84.5mm, and then deshrouded (ie the GSR like combustion chamber). The core was a 1999 b16a (civic SI) head.
liam
#5
Junior Member
Join Date: May 2006
Location: Louisville, Kentucky, United States
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: pt71gtq, pte, sfwd stuff, afi turbo manifolds, tilton, b-series & d-series parts - tons of s
is the xtr6 clutch for a d series or b series, and how much do you want for it?
#6
Honda-Tech Member
Thread Starter
Re: FS: pt71gtq, pte, sfwd stuff, afi turbo manifolds, tilton, b-series & d-series parts - tons of s
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slowsol95 »</TD></TR><TR><TD CLASS="quote">is the xtr6 clutch for a d series or b series, and how much do you want for it?</TD></TR></TABLE>
Its for a d-series and i was going to include that clutch with the dohc zc motor. Its a package deal - the whole motor, valve cover to oil pan, clutch and flywheel, everything. Just add a tranny (or buy mine) and go!
If you are interested in just the clutch - let me know its almost new - ill think about splitting it up.
thanks,
liam
Its for a d-series and i was going to include that clutch with the dohc zc motor. Its a package deal - the whole motor, valve cover to oil pan, clutch and flywheel, everything. Just add a tranny (or buy mine) and go!
If you are interested in just the clutch - let me know its almost new - ill think about splitting it up.
thanks,
liam
Trending Topics
#9
Honda-Tech Member
Thread Starter
Re: FS: pt71gtq, pte, sfwd stuff, afi turbo manifolds, tilton, b-series & d-series parts - tons of s
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dual Cam Racing »</TD></TR><TR><TD CLASS="quote">can see actual pics of the manifold combo</TD></TR></TABLE>
Ill take some tonight for you and post them
Ill take some tonight for you and post them
#10
Honda-Tech Member
Thread Starter
Re: FS: pt71gtq, pte, sfwd stuff, afi turbo manifolds, tilton, b-series & d-series parts - tons of s
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by liam821 »</TD></TR><TR><TD CLASS="quote">
Ill take some tonight for you and post them </TD></TR></TABLE>
here ya go - some pictures of the b-series topmount + downpipe
The pt71gtq on top just for the picture
Ill take some tonight for you and post them </TD></TR></TABLE>
here ya go - some pictures of the b-series topmount + downpipe
The pt71gtq on top just for the picture
Thread
Thread Starter
Forum
Replies
Last Post
integlspwr2k
Classifieds: Forced Induction
3
03-05-2008 06:40 PM
es four
Classifieds: Forced Induction
12
07-15-2003 12:02 PM