FS:COMPLETE TURBOKIT from Acura Integra Type R, ITR, for any integra. Save $$$ and time on fabricat
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2002
Posts: 6,112
Likes: 0
Received 0 Likes
on
0 Posts
FS:COMPLETE TURBOKIT from Acura Integra Type R, ITR, for any integra. Save $$$ and time on fabricat
best offer takes it! http://cgi.ebay.com/ebaymotors/ws/eB...m=270555528951
located in QUEENS NYC
MAKE OFFERS MAKE OFFERS MAKE OFFERS MOTIVATED TO SELL FAST
contact me via email v3tcdc2@hotmail.com make offers, price is negotiable
Starting out or tiem to upgrade? Ether way you must take a look at my turbo kit. Best parts give the best results!! Everything is Stainless steel or aluminum or cast stainless steel and 12.9 grade bolts. Capable of safe 350whp or more.
- Inline Pro Manifold Stainless Steel Cast
- T04b 50 Trim Polished compressor housing T3 .48 a/r stage2 wheel Turbonetics
- 3" Stainless Steel Downpipe by Spooling Performance, Finshed off by 3-2.5" reducer with both flanges, for exhaust and downpipe already welded on.
- turbosmart black ultra gate 38mm with several springs
- stainless steel dumptube
- 2.5" Inline Pro aluminum coated/polished IC piping, flanged with hks before intercooler and before throttle body.
- 2 hks style bov's
- Custom A/C line, unlike stock this one goes behind radiator to avoid turbo heat
- Braided Send line with all the fittings
- High temp return line with barb aeromotive swiwel fittings plus orange fireproof cover to go over the top of the line.
- Threadstone 28.5"x3.5"x6" Intercooler with brackets welded to fit into stock holes with no drilling welding
- Hight temp silicone Couplers and SS T bolts
- Aluminum 3" intake red anodized with 8" K&N filter
- breather setup, valve cover with additional 2 fittings, bypass system for pcv valve - this helps save and extend the lif of the engine!!!!
- all hoses and fittings, all hardware
MOST PARTS USED FOR LESS THAN A YEAR AND HARDLY 2K miles...
located in QUEENS NYC
MAKE OFFERS MAKE OFFERS MAKE OFFERS MOTIVATED TO SELL FAST
contact me via email v3tcdc2@hotmail.com make offers, price is negotiable
Starting out or tiem to upgrade? Ether way you must take a look at my turbo kit. Best parts give the best results!! Everything is Stainless steel or aluminum or cast stainless steel and 12.9 grade bolts. Capable of safe 350whp or more.
- Inline Pro Manifold Stainless Steel Cast
- T04b 50 Trim Polished compressor housing T3 .48 a/r stage2 wheel Turbonetics
- 3" Stainless Steel Downpipe by Spooling Performance, Finshed off by 3-2.5" reducer with both flanges, for exhaust and downpipe already welded on.
- turbosmart black ultra gate 38mm with several springs
- stainless steel dumptube
- 2.5" Inline Pro aluminum coated/polished IC piping, flanged with hks before intercooler and before throttle body.
- 2 hks style bov's
- Custom A/C line, unlike stock this one goes behind radiator to avoid turbo heat
- Braided Send line with all the fittings
- High temp return line with barb aeromotive swiwel fittings plus orange fireproof cover to go over the top of the line.
- Threadstone 28.5"x3.5"x6" Intercooler with brackets welded to fit into stock holes with no drilling welding
- Hight temp silicone Couplers and SS T bolts
- Aluminum 3" intake red anodized with 8" K&N filter
- breather setup, valve cover with additional 2 fittings, bypass system for pcv valve - this helps save and extend the lif of the engine!!!!
- all hoses and fittings, all hardware
MOST PARTS USED FOR LESS THAN A YEAR AND HARDLY 2K miles...
Last edited by vtec.dc2; 03-29-2010 at 09:47 PM.
Trending Topics
#22
Honda-Tech Member
Thread Starter
Join Date: Aug 2002
Posts: 6,112
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS:COMPLETE TURBOKIT from Acura Integra Type R, ITR, for any integra. Save $$$ a
back for sale.. please.. NO SHIPPING>> do not bid unless you're planning to pick it up from Queens, New York
Thread
Thread Starter
Forum
Replies
Last Post
PeakBoost
Forced Induction
22
11-12-2008 10:24 AM
DSRxSALSA
Classifieds: Forced Induction
131
05-17-2004 05:52 PM