GreatWave's not-so-jdm Integra build
03-11-2016, 06:55 AM
#26
Re: not_so_jdm_eh2's not-so-jdm Integra build
It's been a couple weeks since I posted last. I finally got around to a few little things. I fixed the shifter rattle against the exhaust, prepped my GSR trans to hopefully install this weekend, got my other tires in finally. I'll leave a couple pictures here so this doesn't get boring.
03-11-2016, 06:58 AM
#27
Re: not_so_jdm_eh2's not-so-jdm Integra build
I need to measure my ride height at the jack points, and the car will probably get raised a bit. I'll probably go for around stock Type R height. I also need to check my sunroof drains because I woke up to about 3 inches of water in back this morning 
03-14-2016, 06:50 AM
#28
Re: not_so_jdm_eh2's not-so-jdm Integra build
Finally got in the shop to replace my clutch and toss in the GSR trans I had lying around. Took my sweet time with it but it's done. Turns out the noise was coming from the throwout bearing.
05-04-2016, 08:16 PM
#36
Honda-Tech Member
07-12-2016, 10:24 AM
#37
Re: not_so_jdm_eh2's not-so-jdm Integra build
Not much of an update, but progress nonetheless. A couple months ago I ordered an hid kit from TRS, best decision I've ever made as far as lighting is concerned. PnP kit, and it's damn nice. Also bought a fender roller, 10mm spacers, and extended studs. Just gotta find the time to adjust the suspension and install everything.
07-19-2016, 11:32 AM
#38
Re: not_so_jdm_eh2's not-so-jdm Integra build
just landed a good deal (in my opinion) on a factory R spoiler from a place that's local to my hometown. Great condition, Championship White, and getting picked up tomorrow ! will have it painted R-81 and get my rep sold soon. Also made my own license plate angler based on the ones that Top1 motors sells, for quite a bit less dough, will post pics soon
08-02-2016, 09:19 AM
#42
Re: not_so_jdm_eh2's not-so-jdm Integra build
The car is now 2/3 of the way in becoming a Honda, got one more emblem at home to stick on later. Installed the new OEM Type R wing last week, and picked up a clean bumper and lights from a 94 teg. As soon as the Si-VTEC lip and new tow strap are in I'll paint them and toss everything together!
08-03-2016, 12:52 PM
#44
Re: not_so_jdm_eh2's not-so-jdm Integra build
Little bit of a parking lot hit and run last night, except I watched her hit my poor teg and leave 
damage isn't too bad, just waiting to hear from her insurance. Got my last honda badge on and it confused the officer becuase he was looking for an acura 
damage isn't too bad, just waiting to hear from her insurance. Got my last honda badge on and it confused the officer becuase he was looking for an acura 
08-08-2016, 09:12 AM
#48
Re: not_so_jdm_eh2's not-so-jdm Integra build
Not an update on the teg, but I don't really care. Got to my dad's shop to work on my front end swap and a friend of his walks up. "There's a Skyline out back, check it out before I deliver it".
Fresh off the boat earlier this week. RB20DET. Runs smooth, needs a bit of work. Too bad it was already purchased.
Fresh off the boat earlier this week. RB20DET. Runs smooth, needs a bit of work. Too bad it was already purchased.
08-09-2016, 07:42 AM
#49
Re: not_so_jdm_eh2's not-so-jdm Integra build
I didn't get any before shots from cleaning my headlights, but I got some good after shots. I'm really happy with how the 94 front looks. I've probably got 10 hours or so in prep and paint, and it still needs a good wet sand and polish. Bondo filler primer, Duplicolor Perfect Match R81. and Krylon clear coat.
