Compression ratio of 10.5:1 and 91 octane???
#1
Thread Starter
Join Date: Oct 2005
Location: Winnipeg, MB, Canada
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Compression ratio of 10.5:1 and 91 octane???
If I had a compression ratio of about 10.4 or 10.5:1, could I use 91 octane or atleast 94 octane (only 2 higher octanes available in my area)?
#2
Junior Member
Join Date: Nov 2005
Location: Buckley, WA, usa
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
Re: Compression ratio of 10.5:1 and 91 octane??? (mattie_96)
im pretty sure you can cuz im about to put in either jdm itr or p30 pistons in my gsr and im gonna have higher comp than that and im gonna be runnin 92 with a tune
#5
Thread Starter
Join Date: Oct 2005
Location: Winnipeg, MB, Canada
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
ok thanks alot guys that answers my question.
And as far as tuning I guess timing is the main one in order to prevent detonation with such high compression. But im using the stock cam so (z6 and y8 head/y8 cam) fuel shouldnt be affected.
BUt ill do my research on the tuning aspect of my build...thanks again
And as far as tuning I guess timing is the main one in order to prevent detonation with such high compression. But im using the stock cam so (z6 and y8 head/y8 cam) fuel shouldnt be affected.
BUt ill do my research on the tuning aspect of my build...thanks again
Thread
Thread Starter
Forum
Replies
Last Post
pumpkyn
Honda Civic / Del Sol (1992 - 2000)
19
08-17-2006 09:24 PM
*Boostwerks*
All Motor / Naturally Aspirated
10
10-05-2004 11:26 PM