DC5-R, got code P1253
05-06-2010, 03:05 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: St. Kitts
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
DC5-R, got code P1253
Hi guys
Ok I installed an Innovate LC1 wideband and Apexi AFC NEO into a DC5 R. The car is stock otherwise from an Injen CAI, DC Sports header and Apexi Exhaust. After the install I got a cel and immediately pulled code 1253...my scanner says it Pedal Correlation?? ... Ive searched around and found its actually a VTEC malfunc. Has anyone dealt with this problem before. The car has a rev cut @ around 4000rpms. Oh forgot to mention the car came from Japan, the previous owner had a revspeed meter installed and removed it before auction so some of the ecu wires were previously spliced into. Thanks!
Ok I installed an Innovate LC1 wideband and Apexi AFC NEO into a DC5 R. The car is stock otherwise from an Injen CAI, DC Sports header and Apexi Exhaust. After the install I got a cel and immediately pulled code 1253...my scanner says it Pedal Correlation?? ... Ive searched around and found its actually a VTEC malfunc. Has anyone dealt with this problem before. The car has a rev cut @ around 4000rpms. Oh forgot to mention the car came from Japan, the previous owner had a revspeed meter installed and removed it before auction so some of the ecu wires were previously spliced into. Thanks!
05-06-2010, 03:11 PM
#3
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: St. Kitts
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
05-06-2010, 03:27 PM
#4
Surje.motorsports
Join Date: Aug 2007
Location: mechanicsburg, pa, usa
Posts: 3,523
Likes: 0
Received 0 Likes
on
0 Posts
05-06-2010, 03:29 PM
#5
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: St. Kitts
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
