CivicSI87

Hey all,


All right so here's the problem. I have a 96 integra gsr with a viper alarm. I recently had my windshield smashed in by some d bag and now is where the problem begins. I had the shattered windshield removed as well as inspection sticker and the little remote that attachs to the glass on top of inside of windshield. Once the old glass was taken out my remote has been showing that the car is unlocked, but the led light is flashing alarmed. So i disconnected the battery just so we could get new windshield back in without the alarm keep going off. I restuck the old alarm satelite on inside of windshield and rehooked up battery, but now the alarm wont shut off til it cycles. But then even once it cycles the car is still alarm and the remote shows its unlocked. I replaced the battery on my remote, researched everything about it and can't come to a solution. I tried the hidden valet button pushed it when alarm was going off and still nothing. Tried all the buttons on remote and nothing. Any suggestions would be helpful. I cant drive it so in desperation mode. Thanks!

HF_DB8

Do you have a 2 way / paging alarm? Is the ignition on when you are pushing the valet button?

CivicSI87

I'm not entirely too sure what that means. I'm not too in to the whole electronical aspect of cars such as alarms.Its the viper 479 v p x. And no ignition is not on when i push the valet button.

koss1229

You do need to turn the ignition to On position in order to activate the valet mode. So make sure you have your wires connected to ignition.
I was too lazy to connect my remote start wires back in the day and now i can't program my new remote