Integra 1.8 timing marks
10-26-2004, 03:12 PM
#2
Honda-Tech Member
iTrader: (1)
Join Date: Jan 2002
Location: Nowhere and Everywhere
Posts: 29,530
Likes: 0
Received 52 Likes
on
46 Posts
Re: Integra 1.8 timing marks (Chickomenon)
on which part are you talking about, the crank pulley?
On the crank pulley there is a single white mark indicating TDC, and 3 red marks to the left of the TDC mark, indicating the stock ignition timing setting of 16 deg. +/- 2 deg. BTDC. The middle mark is 16, the mark towards the white mark is 14, and the mark farthest from the white mark is 18. Many people set their timing to 18 BTDC to gain a little extra hp. Just be sure you ALWAYS use premium gasoline if you do this, though.
On the crank pulley there is a single white mark indicating TDC, and 3 red marks to the left of the TDC mark, indicating the stock ignition timing setting of 16 deg. +/- 2 deg. BTDC. The middle mark is 16, the mark towards the white mark is 14, and the mark farthest from the white mark is 18. Many people set their timing to 18 BTDC to gain a little extra hp. Just be sure you ALWAYS use premium gasoline if you do this, though.
10-29-2004, 07:17 AM
#3
Honda-Tech Member
Join Date: Jul 2004
Location: Barnegat, NJ 08005
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Re: Integra 1.8 timing marks (PatrickGSR94)
what do u mean by premium? Like Does that mean just run high octane..like i always put 93 in would that fine fine? sorry for the stupid question..My timing seems to be off so i wanna set it to where i should ahve it.
Thread
Thread Starter
Forum
Replies
Last Post
