Catback size USDM ITR same as JDM ITR??
#4
Honda-Tech Member
iTrader: (5)
Join Date: Dec 2005
Location: Cartagena, Colombia
Posts: 9,609
Received 0 Likes
on
0 Posts
Re: Catback size USDM ITR same as JDM ITR?? (smooz EK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smooz EK »</TD></TR><TR><TD CLASS="quote">i think us is 2.25 and jdm is 2.5.</TD></TR></TABLE>
x2
x2
#5
Join Date: May 2005
Location: san diego/Alabama, ca, 92105
Posts: 4,115
Likes: 0
Received 0 Likes
on
0 Posts
Re: Catback size USDM ITR same as JDM ITR?? (jdm_bones)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm_bones »</TD></TR><TR><TD CLASS="quote">x2 </TD></TR></TABLE>
x3
x3
#6
Darth ModerVader
Re: Catback size USDM ITR same as JDM ITR?? (smooz EK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smooz EK »</TD></TR><TR><TD CLASS="quote">i think us is 2.25 and jdm is 2.5.</TD></TR></TABLE>
This has been stated on a number of occasions throughout the years, but I don't ever recall seeing any conclusive proof to either confirm or deny it. I'm not saying it isn't true (though I have some doubt), but if anything, it would make more sense if the JDM version were 60mm OD like the vast majority of Japanese performance systems for the car.
This has been stated on a number of occasions throughout the years, but I don't ever recall seeing any conclusive proof to either confirm or deny it. I'm not saying it isn't true (though I have some doubt), but if anything, it would make more sense if the JDM version were 60mm OD like the vast majority of Japanese performance systems for the car.
Trending Topics
#8
Honda-Tech Member
Join Date: Nov 2002
Location: Los Angeles, CA, USA
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
Re: Catback size USDM ITR same as JDM ITR?? (smooz EK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smooz EK »</TD></TR><TR><TD CLASS="quote">i think us is 2.25 and jdm is 2.5.</TD></TR></TABLE>
#10
Darth ModerVader
Re: Catback size USDM ITR same as JDM ITR?? (tegG2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegG2 »</TD></TR><TR><TD CLASS="quote">USDM was claimed it was 2.5'' but it actually isnt. IDK for shure what either really is. </TD></TR></TABLE>
USDM is 2.25" OD with several smaller "bottlenecks". This has been confirmed by many individuals (myself included).
USDM is 2.25" OD with several smaller "bottlenecks". This has been confirmed by many individuals (myself included).
#12
Member
Join Date: Jan 2005
Location: Anaheim, Ca, USA
Posts: 1,390
Likes: 0
Received 0 Likes
on
0 Posts
Re: Catback size USDM ITR same as JDM ITR?? (tegG2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegG2 »</TD></TR><TR><TD CLASS="quote">USDM was claimed it was 2.5'' but it actually isnt. IDK for shure what either really is. </TD></TR></TABLE>
probably the OD
ID:
usdm: 2.25
jdm: 2.36
jdm header collector is 2.5 guys. Same as the inlet for the jdm cat. But the rest of the system is 2.36 ID.
probably the OD
ID:
usdm: 2.25
jdm: 2.36
jdm header collector is 2.5 guys. Same as the inlet for the jdm cat. But the rest of the system is 2.36 ID.
#14
Honda-Tech Member
Join Date: Jul 2001
Location: Pasadena, CA, USA
Posts: 6,190
Likes: 0
Received 0 Likes
on
0 Posts
Re: Catback size USDM ITR same as JDM ITR?? (smooz EK)
No, the ITR piping is about 2 inches longer than GSR piping.
The b-pipe is equivalent to the length of an LS b-pipe.
The b-pipe is equivalent to the length of an LS b-pipe.
Thread
Thread Starter
Forum
Replies
Last Post
jessevtec
All Motor / Naturally Aspirated
6
12-02-2003 09:57 AM