ryanxmx31

i want to get a new head for my b18b, what do you guys think will make more power a built b18b head or a a gsr head lsvtec ?

sPaRk'iT

If both heads are going to be built then of course the vtec head would be better.

Jtuned DC2

Cmon now you want built 7k Rpm redline or maybe a little more or like.. 9k rpm redline? haha VTEC head is better.

coronadrinker

WTF are you guys talking about!!!!!!!!!

Dude if you "build" your LS head(P&P,Cams,valves,Springs,Etc.) it will be the same or better(depending on how much of the pre mentioned you do) than a GSR head except for the comp.(can be changed by milling the head) and it will be a little less gas efficient due to lack of smaller gas saver cam lobs

It may be easier to just do LS VTEC but it would be way more low profile looking with a built LS head

good luck

tegdude227

thank you somebody that thought before they post

Jtuned DC2

its an ls... maybe it will be torqueier but tell me why the Spoon DC2 doesnt have a built LS motor in it?

coronadrinker

because they wanted to, i guess. lets not start the "GSR vs. LS" thing again, that **** is as pointless as the "chicken or the egg" thing.

what the hell does that have to do with the OP's question?

CompleteSR06

I MADE THE THE HEAD CHANGE MY SELF LAST SUMMER NOW I HAVE STAGE 2 CAMS IN THAT HEAD GO VTEC

Boostedb20EH2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KevLo &raquo;</TD></TR><TR><TD CLASS="quote">Cmon now you want built 7k Rpm redline or maybe a little more or like.. 9k rpm redline? haha VTEC head is better. </TD></TR></TABLE>
How is this not possible if the head is built. And what the hell does the redline matter if youre not making power at 9k

Jtuned DC2

because 7k rpm redline are for bitches..

doood

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KevLo &raquo;</TD></TR><TR><TD CLASS="quote">because 7k rpm redline are for bitches..</TD></TR></TABLE>

and 9k are for the cool kids?

redDAinteg

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KevLo &raquo;</TD></TR><TR><TD CLASS="quote">because 7k rpm redline are for bitches..</TD></TR></TABLE>

EVOs redline at 7k and im pretty sure they arent for <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KevLo &raquo;</TD></TR><TR><TD CLASS="quote"> bitches..</TD></TR></TABLE>

Jtuned DC2

they are turboed....

doood

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KevLo &raquo;</TD></TR><TR><TD CLASS="quote">they are turboed....</TD></TR></TABLE>

and? you're making yourself look like an idiot.

DA is best

iTrader: (1)

everybody and there mom has ls/vtec, i'd say do something a little different and build the ls head with pnp, 3angle vj, crower 405's with valve train, blox/skunk2 IM, 68mm TB and a hondata IM gasket = happiness

Jtuned DC2

whatever you pussies, VTEC motors are better.. Get that through your fukin heads.. And thats the end.

davidluko

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KevLo &raquo;</TD></TR><TR><TD CLASS="quote">whatever you pussies, VTEC motors are better.. Get that through your fukin heads.. And thats the end.</TD></TR></TABLE>

Haha, you're a retard. Can anybody here ban him?

DA is best

iTrader: (1)

vtec motors are better, hhhmmmmm i think you better keep on your morning pills before you crasy, lets talk about this:

ls motor=$400
gsr motor=$3500

now put that $3100 in the ls and have a good day......

DA is best

iTrader: (1)

oh and here is a little story, my DA LS with a b16 trans, ebay intake, stock exhaust....i have raced gsr's at the track and they had i,h,e and i have wasted them by two cars, so just because your valve cover says vtec doesnt mean its better