Auto to manual integra checklist
08-26-2006, 12:20 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2006
Location: Jersey
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
Auto to manual integra checklist
I'm posting what I have for my auto-manual swap for 2 reasons:
1. If I forget soemthing ppl can tell me
2. So in the future ppl can use this page to help themselves.
Heres my car, '97 GS DC4
Heres the doner '97 GSR DC2
...and heres why its a doner
Heres the parts i've collected so far, dont have pics of them all, but i'll post what I can
Shift linkage / shift **** / boot / console piece
Intermediate shaft
GSR wiring harness
Mounts from GSR, Also have the Hasport conversion mount coming in the mail. Not sure which mounts I need, so I took em all
Manual Starter
Slave cylinder, Master Cyliner, and hard and soft clutch lines, and clutch fluis resivour
Clutch pedal assembly and brake pedal
GSR cluster (Does anyone know if I can use my auto cluster with the tape form this one? I like the black better...)
P72 virgin ECU Obd2a
(no pic, but I swear it looks like and ecu)
The motor and trans will be out of the shop soon, and I'll post pics of thoes.
Not needed for the swap, but I got anyway were a used Icebox and a set of DC Sports headers
I know Im forgeting stuff and I'll add stuff as I remeber it, or as people tell me
Once the list is done, I hope it'll help myself and other people when collecting all these parts
1. If I forget soemthing ppl can tell me
2. So in the future ppl can use this page to help themselves.
Heres my car, '97 GS DC4
Heres the doner '97 GSR DC2
...and heres why its a doner
Heres the parts i've collected so far, dont have pics of them all, but i'll post what I can
Shift linkage / shift **** / boot / console piece
Intermediate shaft
GSR wiring harness
Mounts from GSR, Also have the Hasport conversion mount coming in the mail. Not sure which mounts I need, so I took em all
Manual Starter
Slave cylinder, Master Cyliner, and hard and soft clutch lines, and clutch fluis resivour
Clutch pedal assembly and brake pedal
GSR cluster (Does anyone know if I can use my auto cluster with the tape form this one? I like the black better...)
P72 virgin ECU Obd2a
(no pic, but I swear it looks like and ecu)
The motor and trans will be out of the shop soon, and I'll post pics of thoes.
Not needed for the swap, but I got anyway were a used Icebox and a set of DC Sports headers
I know Im forgeting stuff and I'll add stuff as I remeber it, or as people tell me
Once the list is done, I hope it'll help myself and other people when collecting all these parts
08-26-2006, 12:25 PM
#3
Honda-Tech Member
Join Date: Aug 2004
Posts: 3,664
Likes: 0
Received 0 Likes
on
0 Posts
08-26-2006, 01:26 PM
#5
Join Date: Aug 2006
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Re: (atg1290)
hey i need some doner parts. can u hook me up with the seats?
if ur in cali, i can pick them up and toss u a few bills.
if not, can u ship me just the seat covers? all u have to do is unzip and remove the cover.
i'll give you like 100 for front and rear seat covers if they are in good condition.
if ur in cali, i can pick them up and toss u a few bills.
if not, can u ship me just the seat covers? all u have to do is unzip and remove the cover.
i'll give you like 100 for front and rear seat covers if they are in good condition.
08-26-2006, 03:51 PM
#6
Member
Join Date: Jan 2005
Location: VIRGINIA, RICHMOND
Posts: 2,362
Likes: 0
Received 0 Likes
on
0 Posts
Re: (btech)
Dont forget the front tranny mount..it uses 3 bolts instead of 2 on the auto.
You also dont need the whole engine harness....i just used the auto one and had some left over plugs.
You also dont need the whole engine harness....i just used the auto one and had some left over plugs.
Thread
Thread Starter
Forum
Replies
Last Post
