maxim

I've been looking everywhere for these and can't find anyone that sells them. Who can get these and how much? I need these for the Eagle H-beam rods that will be going into my B16a2. I even have the part number for them:
ARP # 300-6708 (this is a set of 8)

ladysman

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by maxim &raquo;</TD></TR><TR><TD CLASS="quote">I've been looking everywhere for these and can't find anyone that sells them. Who can get these and how much? I need these for the Eagle H-beam rods that will be going into my B16a2. I even have the part number for them:
ARP # 300-6708 (this is a set of 8)

</TD></TR></TABLE>

Try summitt.
Don't forget to get the rods machined for the bolts.

maxim

Summit doesn't have them on their site. Anywhere else?

Boostfed

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by maxim &raquo;</TD></TR><TR><TD CLASS="quote">Summit doesn't have them on their site. Anywhere else?</TD></TR></TABLE>
Usually if Summitt doesn't have them listed you an give them a manufacturers part# and they can get a price and MUCH BETTER than anyone else on the things like ARP, MSD and Autometer except Import stuff is still mad Expensive they atcually charge MSRP for Apexi ****. But they can get them if they are available from ARP. Good luck.

Cyphear

Let me know what you find maxim. I'm curious. I heard you have to re-machine the hole for the rod bolt to make the 625+s fit.

maxim

Yes, the rods would need to be machined or rounded after you have installed the 625+ bolts since the H-beams were made for the cheapo 28ftlb bolts.

I found a few places that sells them, but they seem to be extremely expensive:

http://www.centuryperformance....it=go

http://www.tognottisautoworld....-6708


Modified by maxim at 2:33 PM 8/10/2003

ladysman

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by maxim &raquo;</TD></TR><TR><TD CLASS="quote">Yes, the rods would need to be machined or rounded after you have installed the 625+ bolts since the H-beams were made for the cheapo 28ftlb bolts.

I found a few places that sells them, but they seem to be extremely expensive:

http://www.centuryperformance....it=go

http://www.tognottisautoworld....-6708


Modified by maxim at 2:33 PM 8/10/2003</TD></TR></TABLE>

Go to http://www.theoldone.com You can get the bolts from them for about $140 I think.

blackANESE

iTrader: (2)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by maxim &raquo;</TD></TR><TR><TD CLASS="quote">
http://www.centuryperformance....it=go</TD></TR></TABLE>

$275, damn, that's what I paid for my eagles brand new

maxim

thanks ladysman, thats close the the deal I am looking for.