What size allen are the freeze plugs?
05-13-2006, 07:16 AM
#1
Thread Starter
Join Date: Sep 2005
Location: Suburbs, MN, USA
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
What size allen are the freeze plugs?
My sleeved block i received didn't come back with all the freeze plugs back in and i have a junk b18c1 block and take the plugs from there and swap them on my new one. Any idea what size that allen head is? it's pretty damn big...also what do you use to seal that plug up? would black rtv be ok?
Trending Topics
05-13-2006, 10:45 AM
#8
Honda-Tech Member
iTrader: (3)
Join Date: Jan 2000
Location: Bloomington, IN, USA
Posts: 10,180
Likes: 0
Received 3 Likes
on
3 Posts
Re: What size allen are the freeze plugs? (93c1sol)
Those block plugs use aluminum crush washers. You shouldn't need to Hondabond or silicone it. If you need new crush washers (28mm), order the ones from an old '88 to '91 Prelude: 12207-634-300. You might also be able to use the 28mm crush washer from the cylinder block's coolant plug on the EX side of the block (19041-PR4-000 I believe).
05-13-2006, 02:05 PM
#9
Mr. Badwrench
Join Date: May 2002
Location: stranger in a strange land
Posts: 14,146
Likes: 0
Received 2 Likes
on
2 Posts
Re: What size allen are the freeze plugs? (earl)
a 9/16ths is a little larger and will work if you have the room, i didnt have a 14mm but had a 9/16ths, and with the intake off, you could tap the socket in.
05-13-2006, 02:40 PM
#10
Honda-Tech Member
Re: What size allen are the freeze plugs? (boostedcivicsir)
if you dont feel like spending money on the 14mm hex key or socket
get a 14mm old headbolt or a regular long bolt
stick the head into the fitting and use a pipe wrench to tighten the fitting in
get a 14mm old headbolt or a regular long bolt
stick the head into the fitting and use a pipe wrench to tighten the fitting in
05-13-2006, 05:50 PM
#12
Honda-Tech Member
Re: What size allen are the freeze plugs? (IN VTEC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IN VTEC »</TD></TR><TR><TD CLASS="quote">Those block plugs use aluminum crush washers. You shouldn't need to Hondabond or silicone it.</TD></TR></TABLE> Yeah, you are right about the sealant. I am just **** about things like that. I can't chance sending a leaker to a customer.
05-13-2006, 07:46 PM
#13
Honda-Tech Member
iTrader: (3)
Join Date: Jan 2000
Location: Bloomington, IN, USA
Posts: 10,180
Likes: 0
Received 3 Likes
on
3 Posts
Re: What size allen are the freeze plugs? (earl)
I just hate cleaning up the sealant that's glued to everything when I have to strip and prep a used head or block for cleaning to get it ready for machine work. Different strokes for different folks.
05-14-2006, 01:29 PM
#14
Honda-Tech Member
Join Date: Jul 2003
Location: Auburn, WA, United States
Posts: 1,925
Likes: 0
Received 1 Like
on
1 Post
Re: What size allen are the freeze plugs? (IN VTEC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IN VTEC »</TD></TR><TR><TD CLASS="quote">I just hate cleaning up the sealant that's glued to everything when I have to strip and prep a used head or block for cleaning to get it ready for machine work. Different strokes for different folks.</TD></TR></TABLE>
Dont use so much and you wont have the problem.
Dont use so much and you wont have the problem.
Thread
Thread Starter
Forum
Replies
Last Post
vxnine
Honda Civic / Del Sol (1992 - 2000)
1
01-22-2005 02:08 PM
