jasonjai

Hi guys, I have a JDM front 95 Integra at the shop getting a turbo setup installed. I have the turbo setup to run a/c and p/s, so the compressor is on the passenger side. The installer mentioned he has to cut the splash shield to run the intercooler piping because my windshield washer reservoir/tank is in the way. This is my daily, so trying to find a way to keep the windshield washer tank, but have enough room to clear for the intercooler piping with minimal cutting.

I was thinking a universal windshield washer fluid tank relocated for clearance: $20.99 JC Whitney universal windshield washer fluid tank, Vibrant windshield washer fluid tank $34.99, or a Greddy universal windshield washer fluid tank $45.75.

Any of you guys have experience with installing one of these? Or relocating the windshield washer fluid tank?

Thanks!

Pompiuses

Here's a picture of mine relocated.

jasonjai

Thanks for the help! The tuner I ended up using cut the intercooler pipe to run underneath the windshield washer fluid reservoir, but now I'm running no engine splashshield/guard. Now just contemplating cutting that shield/guard to accomodate the downpipe, and intercooler pipes for winter.

Muckman

iTrader: (2)

It can be done without relocating. I hugged a 2.5" pipe under the fluid tank. I moved it up by 1/2" by ovaling the bolt holes in the plastic tabs. And I shaved 1/8" off the bottom of the tank where the seam is. And that was enough to clear the fluid tank and the splashshield. Get creative!

codenamezero

care to include the brand and link on where you bought it?