Turbo rebuild question (SC34/Garrett T3/T4 57 trim)
#1
Turbo rebuild question (SC34/Garrett T3/T4 57 trim)
Unfortunately for me, the oil seal blew Which sucks. I JUST got it running. But hey, what can ya do?
I need a rebuild and I"m having problems finding a precision rebuild kit.
In this thread, I was told the SC34 (3431e)is the same as the Garrett T3/T4 57 trim.
Is that correct? I definetly want to either GET the right rurbo or be able to tell whatever company I have rebuild it exactly what I have so there are no surprises.
Here are pics...
It's says 34 31 E
If it helps any, on the compressor side, the outlet is 2"
Thanks for t3h help!
OH, BTW, it was at full boost around 3300-3500 RPM, felt great on muh lil GSR!
I need a rebuild and I"m having problems finding a precision rebuild kit.
In this thread, I was told the SC34 (3431e)is the same as the Garrett T3/T4 57 trim.
Is that correct? I definetly want to either GET the right rurbo or be able to tell whatever company I have rebuild it exactly what I have so there are no surprises.
Here are pics...
It's says 34 31 E
If it helps any, on the compressor side, the outlet is 2"
Thanks for t3h help!
OH, BTW, it was at full boost around 3300-3500 RPM, felt great on muh lil GSR!
#2
B*a*n*n*e*d
Join Date: Apr 2008
Location: Princeton, WV U.S.A.
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo rebuild question (SC34/Garrett T3/T4 57 trim)
sounds like you have the exact same problem I did.... I'm trying to figure out what CHRA I could just slap on the housings and forget about using the oem precision seals.
#4
B*a*n*n*e*d
Join Date: Apr 2008
Location: Princeton, WV U.S.A.
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo rebuild question (SC34/Garrett T3/T4 57 trim)
Its the center section. If you unbolt the compressor and exhaust housings the middle part would be a complete CHRA or (center housing) I think its Center Housing Rotating Assembly
#6
Honda-Tech Member
Join Date: May 2001
Location: MD
Posts: 1,595
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo rebuild question (SC34/Garrett T3/T4 57 trim)
i had that turbo with my gsr with an inline pro kit...great snail. BOOST came early and pulled dick hard till 8500
#8
Honda-Tech Member
Join Date: Jan 2005
Location: b00sting my D16s, SoWis, USA
Posts: 7,015
Likes: 0
Received 7 Likes
on
5 Posts
Re: Turbo rebuild question (SC34/Garrett T3/T4 57 trim)
Have you tried calling Precision? They may not sell the kit, but should be able to tell you if it uses the same parts. IIRC all precision does is buy garrett CHRA's and add their own housings, and sometimes make custom sizes with different comp wheels. Changing the journal/thrust bearing sizes & turbine shaft/wheel would not be cost-effective, since Garrett uses a good design already. All they might do is upgrade to the 360* thrust bearing.
#10
Honda-Tech Member
Join Date: Dec 2006
Location: Plano, Texas, United States
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo rebuild question (SC34/Garrett T3/T4 57 trim)
Did you use an oil restrictor? I am jw because I have the same style turbo except it is a turbonetics, but I want to avoid the seals blowing on mine as well.
Basically just wondering what do you think caused it to blow?
Basically just wondering what do you think caused it to blow?
Thread
Thread Starter
Forum
Replies
Last Post